Castle Easel Card

Hello and welcome to today’s card, which is part 5 of Myths & Magic Suite Week! For this week’s final card, I thought I would create a castle scene with an Easel Card! It’s been a while since I made an Easel Card, but I thought this would be fun to make into a castle scene! If you’ve never made an Easel Card, it’s actually very easy to make and it can be for any occasion.

The card base is Thich Whisper White cardstock, cut at 4 ¼” x 11”, and scored at 2 ¾” and at 5 ½”:

fullsizeoutput_1c72

After you burnish the score lines, the card will look like this:

fullsizeoutput_1c75

The base layer is from the Myths & Magic Specialty DSP, cut at 4” x 5 ¼”:

fullsizeoutput_1c78

I cut a piece of Smoky Slate cardstock to 3” x 4” and embossed this with the Brick Wall Embossing Folder, adding Smoky Slate ink to the embossing folder first. The top of the castle is DSP cut at 1 ½” x 4”, using the Classic Label Punch, and the “drawbridge” is a piece of Wood Textures DSP Stack, cut out with the 3rdsmallest Layering Squares Framelit:

fullsizeoutput_1c7b

On a piece of Whisper White cardstock, stamp the dragon, flame, knight, and mermaid in Memento ink. These are colored in with Light Lovely Lipstick, Ivory, Light Cherry Cobbler, Light Pumpkin Pie, Dark Crumb Cake, Light & Dark Old Olive, Light & Dark Daffodil Delight, Light & Dark Night of Navy, Light & Dark Smoky Slate, and the Color Lifter from the Stampin’ Blends. These are then cut out with the coordinating framelits, I snipped the mermaid’s tail off because she will be a princess in this scene:

fullsizeoutput_1c7e

I adhered the embossed cardstock and the DSP together and placed the princess peeking out from up top:

fullsizeoutput_1c81

The drawbridge is attached and then I added Black Sequin Jewels at the top:

fullsizeoutput_1c84

This piece is then adhered to the DSP base layer with dimensionals:

fullsizeoutput_1c87

The dragon, fire, and knight are adhered with dimensionals:

fullsizeoutput_1c8a

I used the leaf framelits on the light green 6” x 6” Glimmer Paper and adhered these pieces with liquid glue:

fullsizeoutput_1c8d

I cut this design of DSP to 2 ½” x 4”:
fullsizeoutput_1c90

On a piece of Whisper White cardstock, I stamped the sentiment in Lemon Lime Twist ink and then sponged Old Olive ink around the edge with a Sponge Dauber. This is then cut out with the 5thlarges oval from the Layering Ovals Framelits Dies and the leaves are adhered behind with liquid glue:

fullsizeoutput_1c93

The base layer is adhered to the card base on the lower (or bottom) scored piece:

fullsizeoutput_1c97

What would normally be the inside of the card, this piece of DSP is adhered to the lower bottom:

fullsizeoutput_1c9a

Then the sentiment is adhered to this piece with dimensionals:

fullsizeoutput_1c9d

You have room to write your sentiment above this or you have the backside, which is 4” x 5 ¼”!

Don’t forget, the Magical Day stamp set, Myths & Magic Specialty DSP, Myth & Magic 6” x 6” Glimmer Paper, and the Brick Wall Embossing Folder are on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store while supplies last!!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Let the Designer Series Paper work for you!

Hello and welcome to today’s card, which is part four of the Myths & Magic Suite! Not only are the stamps and coordinating framelits fun to create with, but the Myths & Magic Specialty Designer Series Paper has iridescent glitter designs on one side and all-occasions designs on the other, so I wanted to create a card showing how to make Specialty DSP work for you!

The card base is Island Indigo cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_1c4f

The base layer is the iridescent unicorn DSP, cut at 4” x 5 ¼”:

fullsizeoutput_1c52

The sentiment is stamped on Whisper White cardstock, first in Pool Party ink, and then sponged Island Indigo ink with a Sponge Dauber. This is then cut out with the 3rdlargest circle from the Layering Circle Framelits and then I used the 2ndlargest scalloped circle to cut the glimmer paper:

fullsizeoutput_1c55

The unicorn stamp is stamped in Memento ink on Whisper White cardstock, then colored in with a Blender Pen with Pool Party, Bermuda Bay, Island Indigo, and Gray Granite inks, the horn is colored in with Light Pineapple Punch Stampin’ Blends, and then cut out with the coordinating thinlit:

fullsizeoutput_1c58

I added Wink of Stella all over for more sparkle:

fullsizeoutput_1c5b

To finish creating this card, the base layer is adhered to the card base:

fullsizeoutput_1c5e

The Whisper White circle is adhered to the glimmer scalloped circle with liquid glue and the unicorn is adhered with dimensionals:

fullsizeoutput_1c61

This layer is adhered to the base layer with dimensionals:

fullsizeoutput_1c64

I added some Enamel Shapes in Pool Party, Bermuda Bay, and Island Indigo:

fullsizeoutput_1ca6

The inside sentiment is on a piece of Whisper White cardstock, cut at 4” x 5 ¼”, from the Special Celebrations stamp set in Island Indigo ink. The unicorn is stamped and colored exactly the same as the front of the card and then I used the smallest star image from the stamp set in Pool Party, Bermuda Bay, and Island Indigo inks:

fullsizeoutput_1c6afullsizeoutput_1c6f

Don’t forget, the Magical Day stamp set, Myths & Magic Specialty DSP, Myth & Magic 6” x 6” Glimmer Paper, and the Island Indigo cardstock and ink are on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store while supplies last!!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

One of a Kind

Hello and welcome to today’s card, featuring the Myths & Magic Suite! If you are looking for a cute, quick, and easy card to make if your limited on time or need to make multiples of, this is for you! It is also a great way to use up that Designer Series Paper and make room for all the new DSP that is coming out in the new Annual Catalog!

The card base is Tranquil Tide cardstock, cut at 4 ¼” x 11”, and scored at 5 ½”:

fullsizeoutput_1c3a

The base layer is from the Myths & Magic Specialty DSP, cut at 4” x 5 ¼”, and then cut again at 2”. This is then flipped over, which makes it look like you are using two different pieces of DSP. From the Myths & Magic 6” x 6” Glimmer Paper, cut a 1” piece from the light green glimmer paper and then trim it to 4”:

fullsizeoutput_1c3d

The front sentiment is from the Magical Day stamp set, stamped on a piece of Whisper White cardstock, first inked in Lemon Lime Twist ink, and then use a Sponge Dauber with Tranquil Tide ink around the edges of the stamp. This is then punched out using the Tailored Tag Punch (FYI: this is going to be carried over into the new catalog):

fullsizeoutput_1c40

To create the card front, first adhere the 4” x 3 ½” piece of DSP to the top, then adhere the 2” x 4” underneath, and the 1” strip of glimmer paper is adhered across the seam between the two pieces of DSP. I used a piece of Tranquil Tide Finely Woven Ribbon behind the sentiment and then adhered with dimensionals:

fullsizeoutput_1c43

The inside sentiment is on Whisper White cardstock, cut at 4” x 5 ¼”, the sentiment is first stamped in Lemon Lime Twist ink and then Tranquil Tide ink is sponged around the edges. The smaller stars are stamped in Lemon Lime Twist ink and the larger stars are stamped in Tranquil Tide ink:

fullsizeoutput_1c46

Don’t forget, the Magical Day stamp set, Myths & Magic Specialty DSP, Myth & Magic 6” x 6” Glimmer Paper, and the Tranquil Tide Finely Woven Ribbon are on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store while supplies last!!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Lift Your Spirits

Hello and welcome to today’s card, featuring the Myths & Magic Suite! This super cute card is very easy to make, a little ink, some heat embossing, and washi tape is all you need! This will be sure to brighten someone’s day, so let’s get started!

The card base is Dapper Denim cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_1c18

The base layer is Thick Whisper White cardstock, cut at 3 ½” x 4 ¼”:

fullsizeoutput_1c1b

The wizard from the Magical Day stamp set is stamped in Memento ink and colored in with Light Smoky Slate, Ivory, Bronze, and Light Night of Navy Stampin’ Blends. The stars are heat embossed in Silver Embossing Powder:

fullsizeoutput_1c21

I first used the coordinating wizard thinlit so I could mask him before creating the “blue smoke”, then I used the D Clear Block with some Dapper Denim ink and an Aqua Painter to move the ink around the block, and quickly stamped the ink onto the cardstock. To help fill in the spaces that the ink did not color, I used some of the ink from the lid of the Dapper Denim ink pad and the Aqua Painter:

fullsizeoutput_1c24

The mask for the wizard is then removed and I added a small Clear Faceted Gem to his hand:

fullsizeoutput_1c27

Cut a piece of Whisper White cardstock to 1 1/8” x 4” strip and then use the stripe and the stars washi tape from the Myths & Magic Specialty Washi Tape:

fullsizeoutput_1c2a

The ends are cut with the Banner Triple Punch and the sentiment is from the Lift Me Up stamp set, stamped in Dapper Denim ink on a 1” strip of Whisper White cardstock, trimmed, and then adhered to the banner:

fullsizeoutput_1c2d

The base layer is adhered to the card base with Snail and the banner is adhered with Stampin’ Dimensionals:

fullsizeoutput_1c31

For the inside of the card, cut a piece of Whisper White cardstock, 4” x 5 ¼”, use all three rolls for a strip of each across the bottom, the stars are heat embossed in Silver Embossing Powder, and the sentiment, also from the Lift Me Up stamp set, is stamped in Dapper Denim ink:

fullsizeoutput_1c34

Now, since I did not stamp my sentiment first, it came out wrong! So I stamped the sentiment again on a 1” strip of Whisper White cardstock, then used the new Trio Punch to round the corners, and adhered with Dimensionals. Problem Solved!:

fullsizeoutput_1c37

Don’t forget, the Magical Day stamp set, Magical Mates Thinlits Dies, and the Myths & Magic Specialty Washi Tape are on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store, while supplies last!!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Sea of Mermaids

Hello and welcome to the start of a new week and a new theme, the Myths & Magic Suite! When I first saw this suite in the 2018 Occasions Catalog, this was on my “must” list! I saw so much fun and creativity with everything in this suite, I couldn’t wait to order it! I’ve created a few things so far (One of a Kind, Glitter, Unicorns, and Rainbows, and Triple W Fold Card), so before these products are gone forever (yes, all the products from this suite will be retired May 31st) I wanted to get one last week in!!

The card base is Dapper Denim cardstock cut at 5 ½” x 8 ½” and scored at 4 ¼”:

fullsizeoutput_1bf7

The base layer is Whisper White cardstock cut at 4” x 5 ¼”, Soft Sky ink is sponged on the upper half. The clouds are from the Myths & Magic 6” x 6” Glimmer Paper in iridescent, punched out with the Tree Builder Punch:

fullsizeoutput_1bee

I chose to start with this DSP from the Color Theory Designer Series Paper Stack in Dapper Denim:

fullsizeoutput_1be5

Even though the Magical Mates Framelits Dies come with a smaller “wave” die, I wanted them to be bigger and used the one from the Seasonal Layers Thinlits Dies. The die is placed at the top of each color change and then I trimmed the white off the end:

On a piece of Whisper White cardstock, stamp the mermaid image three times in Memento ink. The mermaid bodies are colored in with Stampin’ Blends, Light and Dark Pool Party, Light and Dark Smoky Slate, and Light and Dark Night of Navy. The face and arms are colored in with Ivory and the hair is colored in with Light and Dark Crumb Cake, Light Pumpkin Pie and Dark Calypso Coral, and Dark Pink Pirouette and Light Lovely Lipstick Stampin’ Blends. Wink of Stella is brushed on the body and the eyelids and then cut out with the coordinating die:

fullsizeoutput_1bf1fullsizeoutput_1bf4

To place the Dapper Denim waves on the base layer, I placed my ruler at the 3” mark across the cardstock and then adhered the first layer. I did this so that it would be straight across and lining up the other pieces would be easy:

fullsizeoutput_1bfa

Starting with the second wave layer, adhere with Mini Dimensionals and then adhere one of the mermaids, doing this for the third and fourth layers. The final layer, adhere Dimensionals along the bottom of the base layer and then place the wave layer on top. I used scissors to trim the pieces that overlapped the card base:

I used Glitter Enamel Dots in Dapper Denim to make it look like bubbles coming up from the waves:

fullsizeoutput_1c06

I cut one of the glimmer clouds in half, adhered those to each edge, and then adhered the remaining cloud with Dimensionals. This completed piece is then adhered to the card base:

fullsizeoutput_1c09

The inside sentiment from Magical Day stamp set is stamped on a piece of Whisper White cardstock, cut at 4” x 5 ¼”, the bubbles are stamped in Dapper Denim ink, the seahorses are stamped in Memento ink, and then colored in with Light and Dark Old Olive, Light and Dark Smoky Slate, Light and Dark Pool Party, and Light and Dark Crumb Cake Stampin’ Blends:

fullsizeoutput_1c0d

Don’t forget, the Magical Day stamp set, Magical Mates, Color Theory DSP Stack, and Glitter Enamel Dots are on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store, while supplies last!! You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Up in the clouds

Hello and welcome to this week’s final feature of the Sunshine & Rainbows stamp set and the Rainbow Builder Dies. Today’s card is a combination of this bundle and the Up & Away Thinlits Dies, I just love it when two products can complement each other and create an awesome card! As I take you through the steps to make this card, you will notice it is not my “normal” way, starting with the card base and building from there. When I started to make this card, I only knew that I wanted the detailed hot air balloon thinlit, the clouds, the rainbow dies, and that I was going to use the new 2018-2020 In Colors and Gorgeous Grape (these are left over cardstock from yesterday’s post). So, let’s get started!

For the detailed hot air balloon thinlit, I chose to use a piece of Silver Foil Sheet because I felt it would help the background colors pop:

fullsizeoutput_1bb5

Next, I cut a piece of Dazzling Diamonds Glimmer Paper, 5 ¼” x 3”, and a piece of Whisper White cardstock, 5 ¼” x 2”, then used the cloud top thinlits from the Rainbow Builder Dies to cut the image out. Since I had enough scrap paper left from each, I used those to cut out two each of the other cloud images:

fullsizeoutput_1bb8

From the Lovely Lipstick, Grapefruit Grove, Pineapple Punch, Call Me Clover, Blueberry Bushel, and Gorgeous Grape cardstock, I cut out the rainbow and the hot air balloon background:

fullsizeoutput_1bbb

To adhere all the hot air balloon pieces together, I used a Fine Tip Glue Pen and this will give you some wiggle room to line up the paper on the back:

fullsizeoutput_1bbe

I decided to Sponge Brayer Balmy Blue onto a piece of Whisper White cardstock, cut at 4” x 5 ¼” for the sky, I felt that with the rainbow and hot air balloons the sky should be very subtle:

fullsizeoutput_1bc1

The card base is Night of Navy cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_1bc4

Since I wanted the rainbow to be peeking out from the clouds, I first put together all the pieces to get an idea of where I wanted them before I adhered anything:

I placed the Gorgeous Grape cardstock down and then positioned it behind the glimmer paper to start building the rainbow (you can always mark the place lightly with a pencil or place a ruler down):

fullsizeoutput_1bcd

I adhered each piece of the rainbow and the clouds with liquid glue, this will give you a little bit of wiggle room to align each piece:

The hot air balloon is adhered with dimensionals:

fullsizeoutput_1bd9

The smaller clouds are adhered with liquid glue and then the larger cloud is adhered to the card base with dimensionals:

fullsizeoutput_1bdc

The inside sentiment is on a piece of Whisper White cardstock, cut at 4” x 5 ¼”, the sentiment is stamped in Night of Navy ink, and the hot air balloons are stamped 2nd, 3rd, and 4thgeneration in Balmy Blue (wanted these to be very light):

fullsizeoutput_1bdf

Don’t forget, the Sunshine & Rainbows stamp set and the Rainbow Builder Framelits Dies on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store!

Did you notice some NEW products used? That’s right! The rainbow was created using the new 2018-2020 In Colors and Gorgeous Grape, which is a new core color! The 2018-2020 In Colors are available NOW in my online store and Gorgeous Grape will be available June 1st! You can head over to my online store by clicking the Shop Now! button at the very top and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Sunny Day

Hello and welcome to today’s card which features the Sunshine & Rainbows stamp set, Rainbow Builder Framelits Dies, and Embossing Paste, using the cloud mask from the Pattern Party Decorative Masks! Now, before I get started showing you how to make this card, I have some creative advice to share: if at first you don’t succeed, try again, and again, and again…For some reason when I was trying to stamp the rainbow using my Stamparatus, it was not working! I would get towards the end and something would happen and I would have to start over! Rather than scrapping the whole project, I started over from the inside and worked my way out when stamping the rainbow. So just remember with multiple step stamping, that if one way does not work for you, try another!

The card base is Tempting Turquoise cardstock, cut at 5 ½” x 8 ½:

fullsizeoutput_1b87

I placed the cloud mask from the Pattern Party Decorative Masks on the card front and then used some painter’s tape on the edge to secure the mask so it would not move while I was spreading the Embossing Paste:

When done, carefully remove the painters tape and I had a container with warm soapy water nearby for the mask, Silicone Mat, and Palette Knives to soak. The card base was then set aside to dry:

fullsizeoutput_1b90

On a piece of Whisper White cardstock measuring 3” x 4 ¼”, stamp the rainbow layers in Lovely Lipstick, Grapefruit Grove, Pineapple Punch, Call Me Clove, Blueberry Bushel, and Gorgeous Grape inks:

Then use the largest scalloped oval from the Layering Ovals Framelits to cut out:

fullsizeoutput_1b99

The sun is stamped in Pineapple Punch ink on Whisper White cardstock, cut out with the coordinating die, and then use the cloud die to cut out two pieces from Tempting Turquoise cardstock and one piece from Whisper White cardstock:

fullsizeoutput_1b9c

The scalloped oval is adhered to the card base with dimensionals and the turquoise clouds are adhered on top with Snail:

fullsizeoutput_1b9f

The sentiment is heat embossed in Silver Embossing Powder on the white cloud and then I used dimensionals to adhere the cloud and the sun:

fullsizeoutput_1ba2

I wanted to do something different for the inside sentiment, so I cut ½” x 5 ¼” strips in Lovely Lipstick, Grapefruit Grove, Pineapple Punch, Call Me Clover, Blueberry Bushel, and Gorgeous Grape cardstocks:

fullsizeoutput_1ba5

These are adhered to the inside piece of Whisper White cardstock, cut at 4” x 5 ¼”, the sun is stamped in Pineapple Punch ink and the sentiment is stamped in Tempting Turquoise ink:

fullsizeoutput_1ba8

This is what it looks like on the inside, so if this is not enough room for you to write your personal note, you could always cut another piece of Whisper White cardstock and either adhere that to the inside of the card (top or bottom) or to the back of the card:

fullsizeoutput_1bab

Don’t forget, the Sunshine & Rainbows stamp set, Rainbow Builder Framelits Dies, and Tempting Turquoise are all on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store!

Did you notice some NEW products used? That’s right! The rainbow was created using the new 2018-2020 In Colors and Gorgeous Grape, which is a new core color! The 2018-2020 In Colors are available NOW in my online store and Gorgeous Grape will be available June 1st! You can head over to my online store by clicking the Shop Now! button at the very top and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!



Product List