Farewell to the 2018-2020 In Colors!

Hello and welcome to today’s card, which is a fun card featuring the Timeless Tulips Bundle and the retiring 2018-2020 In Colors! I really wanted to give these fun and bright colors “one last card” as they will be retiring at the end of the 2019-2020 Annual Catalog, so I thought using the Timeless Tulips Bundle would be perfect for a final farewell card! As excited as I am for the new 2020-2022 In Colors, I’m also sad to see these colors go! They are so bright and cheerful, so why not make a bright and cheerful tulip get well card??

The base layer is Sahara Sand cardstock, cut at 4” x 5 ¼”, embossed with the Coastal Weave 3D Embossing Folder, and then I “dragged” my Crumb Cake ink pad across the embossed cardstock (left to right and top to bottom):

For the rest of the card front, you will need:

1. Use the second largest Stitched Nested Labels Die to cut out of Whisper White cardstock.

2. Stamp the sentiment from Timeless Tulips in Call Me Clove ink on Whisper White cardstock and punch out with the 1 1/8” Scallop Circle Punch.

3. Use enough Call Me Clover Grosgrain Ribbon to tie into a bow along the bottom of the embossed base layer.

4. On Whisper White cardstock, stamp the large tulip in Lovely Lipstick and Blueberry Bushel ink, using the coordinating punch to cut out.

5. Stamp the leaf in Call Me Clover ink on Whisper White cardstock two times and use the punch to cut out (not pictured).

On the die cut Whisper White cardstock, I stamped the small tulip in Pineapple Punch and the medium tulip in Grapefruit Grove inks. I then placed the two punched out tulips on the cardstock to see if I wanted anymore tulips stamped, which I did not:

I created a mask for the small and the medium tulips so I could stamp the stems in Call Me Clover ink:

Leaving the masks on the tulips, I used the smaller of the three leaves in Call Me Clover ink to do some additional fill-in:

Remove the two masks, adhere one leaf each to the large tulips and then adhere with dimensionals:

This piece is adhered to the embossed base layer, the ribbon is tied into a bow, and the sentiment is adhered with a dimensional:

This completed piece is adhered to a Call Me Clover cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Call Me Clover ink and the tulips the same color as the card front, starting with the small tulip on the end:

Isn’t this a bright and cheerful card? So, which color are you going to miss the most? For me, it’s a toss-up between Lovely Lipstick and Blueberry Bushel. Now, if you were to ask me what color would be my favorite when they first came out, I would have told you Grapefruit Grove! It’s funny to me how you think one color may be your favorite, but as time goes on, it can change! The only products that are carrying over are the stamp set, coordinating tulip punch, and dies, so don’t forget, all products on the retirement list are only “while supplies last”!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Perennial Essence + Tropical Oasis = One Cute Easter Card!

Hello and welcome to today’s card, which is a super cute Easter card made with products from the Perennial Essence Suite and the Tropical Oasis Suite! I needed to make a few more Easter cards to send out and to create something different. I wanted to make a cute little bunny card, so I set out to figure out how in the world I was going to create one when I do not have any bunny stamps or punches. I’ve seen some super cute cards that used both Daisy Punches for the ears, but that’s not what I was quite looking for. After looking at my punches, I thought the Perennial Flower Punch would be perfect, but how do I create the inside of the ears? Would you believe the Leaf Punch worked perfectly?? After some “experimenting” with what I wanted for the card front, I decided to go with the “ears” peeking out of grass. Buuuuttttt, I don’t have a current die or punch to create the grass, so now what? (I could always use something retired, but that wouldn’t be fair if you don’t have it) Would you believe I used the crown (or top) die for the pineapple from the In the Tropics Dies!! So, once I figured this all out, the rest of the card just came all together!

The base layer is Crumb Cake cardstock, cut at 4” x 5 ¼”. I used my Soft Suede ink pad to ink the Coastal Weave 3D Embossing Folder, spritz the cardstock with water, and embossed:

For the card front, you will need:

1. A 4 ½” strip of the Very Vanilla Scalloped Lace Trim.

2. A 2 ¼” x 4” piece of this design from the Perennials Essence DSP.

3. Using Whisper White cardstock, use the top leaf from the Perennial Flower Punch to punch out four “bunny ears”.

4. Using Petal Pink cardstock, use the top leaf from the Leaf Punch to punch out four pieces that will be used for the inside of the bunny ears. I used my snips to trim off any excess and to round the cardstock and used my Wink of Stella pen. These are adhered to the Whisper White cardstock pieces with liquid glue.

5. The bottom sentiment from Timeless Tulips is masked to heat emboss the top sentiment in Gold Emboss Powder on So Saffron cardstock. This is then cut out with the smallest rectangle Stitched Rectangle Die.

6. For the grass, I used the crown (or top) die for the pineapple from In the Tropics. I created to smaller pieces in Pear Pizzazz cardstock and the larger piece in Old Olive cardstock. Tip-line the die up with the straight edge of the cardstock, this will make positioning the “grass” easier and not waste any cardstock, if you were to cut the whole piece out of cardstock and then cut down. Also, these dies emboss and cut, so spritz the cardstock with water so the embossed parts show better.

To have the bunny ears poking out from behind the grass, I placed the ears on my grid paper, laid the grass on top to the position I wanted, and then placed a little bit of liquid glue on the back of the grass piece to adhere the ears:

Adhere the DSP layer to the embossed base layer and the larger piece of Old Olive grass in the middle of the DSP with liquid glue:

The two smaller pieces of Pear Pizzazz grass with the bunny ears are adhered with liquid glue, the scalloped lace trim is adhered under the DSP piece (ends adhered behind the embossed base layer), and then the sentiment is adhered over the scalloped lace trim with Mini Dimensionals:

This completed piece is adhered to a So Saffron cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, I masked the top of the sentiment so I could heat emboss the bottom sentiment in Gold Emboss Powder and adhered a ¾” x 4” piece of coordinating DSP along the bottom:

Isn’t this a super cute Easter card?? I just love how you can use products other than what they would normally be used for!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Easter Blog Hop!

Hello and welcome to the Stamp It Group’s Easter Blog Hop! My name is Christina Miller and you are visiting my blog, Christina’s Creative Corner! Whether this is your first stop on the blog hop tour or have hopped on over from another blog, thank you for letting me share my creation with you today!

When it comes to holidays, I always send out cards to family and friends, not just so they know that I’m thinking of them, but also so they will get some happy mail and brighten their day! Depending on how many people are on your list, it can be overwhelming. The card I’m sharing with you today, is actually one that I “mass produced” using the Timeless Tulip Bundle and the So Very Vellum Specialty DSP. If you are like me, I just love stamp sets that can be used for a variety of occasions and the Timeless Tulips is one of those stamp sets!

The base layer for this card is the So Very Vellum Specialty DSP, cut at 4” x 5 ¼”, in Soft Sea Foam:

For the front of the card, you will need:

1. Cut a 5” strip of the Silver Metallic Edge Ribbon and also use enough of the ribbon to tie into a small bow.

2. Use the large tulip stamp, first inking in Grapefruit Grove ink, and then use a Sponge Dauber with Mango Melody ink along the bottom, to stamp on Whisper White cardstock. This is then punched out with the coordinating Tulip Builder Punch.

3. Use the largest oval Stitched Shapes Die to cut out of Whisper White cardstock. I used Mossy Meadow ink to stamp both stem stamps, the curved stem stamp is the tallest and the straight stem stamp for the two shorter stems. I also stamped a leaf in Mossy Meadow next to the tallest stem (if you are looking at the stamp case, it is the middle leaf stamp). I used the smallest tulips stamp (coloring the same way as the large tulip) to stamp on the smaller two stems.

On the vellum base layer, I used my grid paper to help line up the ribbon, placing a small amount of Snail on the back of the ribbon (in the middle) to keep in place and then a small amount of Snail on the back of the base layer to adhere the ends of the ribbon to the back. I adhered the die cut oval to the Vellum DSP, used dimensionals to adhere the large tulip to the tallest stem, and a glue dot to adhere the bow to the ribbon:

This completed piece is adhered to a Thick Whisper White cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”. The adhesive is placed on the back of the vellum, behind the oval and tulip:

The inside sentiment is stamped in Grapefruit Grove ink, which I used my Stamparatus so I would have a nice and even stamped image:

Here are my cards using each of the So Very Vellum Specialty DSP:

As I stated earlier, these cards are “mass produced” and here is how I made 18 cards:

1. I cut and scored all the Thick Whisper White cardstock card bases first.

2. I used one sheet of each color from the Vellum DSP, cutting first at 4” (you will have three pieces) and then turning to the 12” side to cut at 5 ¼” (this will give you two base layers). The leftover small strip is put to the side. 

3. Die cut all the ovals at the same time, I cut 3 ¾” strips of Whisper White cardstock (along the 8 ½” side), and this allowed me to get four ovals from each strip.

4. For the large tulips, I cut a 2 ½” strip of Whisper White cardstock (along the 8 ½” side), stamped the inked/sponge tulip as many times as I could, and then punched out. No, I did not clean the stamp each time and did not see any ink transfer of Mango Melody ink to the Grapefruit Grove ink pad.

5. I first made all the bows and then cut the 5” strips of ribbon.

6. For the stitched oval, I first stamped the stems and leaves and then stamped the two small tulips (use your Stampin’ Pierce Mat underneath). I felt that stamping this way not only made it go faster, but I wasn’t tempted to accidentally ink the stamp in the wrong color. Keeping only the Mossy Meadow out for the stems and leaf and Grapefruit Grove and Mango Melody out for the small tulip.

7. I used my Stamparatus to stamp the inside sentiment to all the card bases. Do not fold and burnish the card base at the score line, leave it flat. Line up the bottom what would be the inside to the top of the Stamparatus edge (the hinge side is at the top), place the sentiment on the plate (which would be the bottom of the plate, closest to you) then ink and stamp away.

8. I assembled the card as directed above.

I did try to figure out the best color combination for the tulips, which makes it easy for “mass production”, and I really liked how the tulips look no matter what color of vellum was used! What do you think?? If you want to, you could always maybe stamp some tulips along the bottom of the inside or cut down those leftover vellum strips to adhere along the bottom of the inside.

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

This month’s giveaway:

The winner from last month’s Sale-A-Bration Blog Hop is:

Don’t forget to scroll down to leave your FIRST and LAST name and a comment with #stampitcontest and keep on hopping on the Blog Hop tour:

1. Tami White  
2. Tina Wardell-Tina’s Crafty Ink Spot  
3. Luly Gonzalez  
4. Dawn Seelhoff – Dawn’s INKlings  
5. SHANNON LORENZ HATCH  
6. Lori McBride  
7. Pam Nichols  
8. Christina Miller  
9. Rachael Rife  
10. Karen Page  
11. Lori Mueller – Stampin’ Dreams  
12. Kim Quade

Product List

One Sheet Wonder with Lovely Lily Pad

Hello and welcome to today’s card, which feature’s the Lovely Lily Pad stamp set, Lily Pad Dies, and Lily Impressions Designer Series Paper from the 2020 Sale-A-Bration Catalog! A couple of weeks ago, I participated in the Stamp It Group’s monthly blog hop which featured cards and projects from the SAB catalog and for my card, I used the Lovely Lily Pad stamp set and coordinating Lily Pad Dies. Well, I absolutely loved how the lily turned out using Stampin’ Blends and heat embossing, so I wanted to create another card, but change up the colors used. The design I used for the base layer of this card actually inspired the colors I used for the lily, which I love how this turned out as well!

For the base layer, I chose this design from the Lily Impressions DSP. This DSP comes in 12” x 12” sheets, so I cut this sheet up to create six cards: trim 1 ½” off the bottom, turn the DSP 90 degrees, cut at 4”, three times across (you will have three 4” x 10 ½” sheets), and then cut those sheets in half (along the 10 ½” side) at 5 ¼”. As for the 1 ½” x 12” strip, cut that at the 4” mark three times and then cut the 1 ½” side in half, at ¾”. This will give you six small strips measuring ¾” x 4”, for the inside of the card:

For the rest of the card front, you will need:

1. Use the Pool Party So Very Vellum cardstock and cut into 2 ½” x 2 ½” squares.

2. Using the Silver Metallic Thread, wrap around your four fingers, four times.

3. Stamp the sentiment from Timeless Tulips in Calypso Coral ink on Whisper White cardstock and punch out with the 1” Circle Punch. Use the 1 3/8” Scallop Circle Punch to punch out a piece of Coastal Cabana cardstock, this will be layered under the sentiment.

4. For the leaves and lily pad, first ink the outline stamp in Versamark ink, then in Garden Green ink, and stamp on Whisper White cardstock. Sprinkle Clear Emboss Powder and set with your heat tool (don’t forget to use your Embossing Buddy on the cardstock first!). I colored these in with the Light Call Me Clover Stampin’ Blends and along one side of the leaves, I used the Dark Call Me Clover Stampin’ Blends to give a little shading. These are then cut out with the coordinating dies.

5. For the large lily, first use your Embossing Buddy on a piece of Whisper White cardstock, stamp the outline stamp in Versamark ink and then Calypso Coral ink, sprinkle with Clear Emboss Powder, and set with your heat tool. I first started coloring the inner part of the flower petals with Dark Calypso Coral Stampin’ Blends, then Light Calypso Coral Stampin’ Blends, and then finally Dark Petal Pink Stampin’ Blends, not just the tip of the petals, but over the whole petal. 

To assemble the lily, leaves, lily pad, and Silver Metallic Thread, I placed some adhesive on the back of the lily and when I placed the metallic thread, I made sure it was coming out from the top of the lily only. I then used glue dots to adhere the leaves and placed a couple more glue dots to adhere the lily pad to the lily:

I used some adhesive along the lily pad and leaves to adhere to the vellum square, positioned towards the bottom of the vellum square:

I used adhesive on the back of the vellum square, behind the lily, and then adhered to the middle of the DSP base layer. The layered sentiment is adhered with a dimensional onto the DSP base layer:

This completed piece is adhered to a Coastal Cabana cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼” and adhere the ¾” x 4” strip of DSP along the bottom:

Isn’t this a super cute “all occasions” card?? I left the inside sentiment out so that I now will have six cards readily available to send out! Yes, the lily, leaves, and lily pad are a little time consuming because of the coloring and die cutting, but honestly, if you have a couple hours just to sit down and let your creativity flow, or even break it up over a few days, this is a great way to use up all these awesome products and send out beautiful cards for any occasion or reason! 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Tulip Get Well Card

Hello and welcome to today’s card, which is a cute “get well” card made with the Pleased as Punch Designer Series Paper and the Tulip Builder Punch! This DSP was recently released by Stampin’ Up! that coordinates with the Small Bloom Punch (from the 2020 SAB Catalog), Heart Punch Pack, Tulip Builder Punch, and Umbrella Builder Punch (these three are from the 2020 Mini Catalog), which is another cute way to use your punches for your creative projects! So, while sitting at my desk and watching some TV, I used the Tulip Builder Punch to punch out as many tulips and leaves just to see how many cards I could make with the punch outs. After it was all said and done, I was able to create six cards using two of the designs from the DSP, one for the tulips and one for the base layer. 

The base layer is this design from the Pleased as Punch DSP, cut at 4” x 5 ¼”. Note-I cut up the 12” x 12” DSP, first trimming 1 ½” off one side, turning 90 degrees and cutting at 4” (three times, along the 12” side), and then cutting those in half on the 10 ½” side, at 5 ¼”. I cut the 1 ½” strip along the 12” side at 4” and then cut the 1 ½” side in half, at ¾”, which are used for the inside. You will then have six 4” x 5 ¼” base layers and six ¾” x 4” strips for the inside:

For the card front, you will need:

1. Stamp the sentiment in Blueberry Bushel ink on Whisper White cardstock, punch out with the 1” Circle Punch, and use the 1 1/8” Circle Scallop Punch on Blueberry Bushel Cardstock, this will be layered under the sentiment.

2. Use the fourth largest layering Stitched Rectangle Die to cut out of Vellum Cardstock. Tip- if you cut the Vellum Cardstock in half along the 8 ½” side, you will be able to cut six of these out.

3. Use one each of the punched-out tulips and three of the punched-out leaves.

To assemble, first adhere the stitched Vellum Cardstock to the base layer DSP (put the adhesive in the middle so the tulips will hide it), arrange/adhere the tulips and leaves, and adhere the layered sentiment with a dimensional:

This completed piece is then adhered to a Blueberry Bushel cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Blueberry Bushel ink, and adhere the ¾” x 4” strip of DSP along the bottom:

Aside from the time it took to punch out the tulips, this is really a very easy card to make! I really like the “rain shower” as the background for the tulips and if you make six of these cards, I feel that any of the sentiments from the Timeless Tulips stamp set could be used for the inside, simple leave the inside blank and stamp the sentiment as needed. This is a great way to have a stash of cards ready to go and use up your DSP! A couple more tips I can pass along, is that you will have enough full size tulips for five cards and for the sixth, you will have to punch out a partial one, but that can be hidden and you can also change up the leaves, the back side of the DSP is green and white speckled, so you can mix those up!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Happy Tulip Card!

Hello and welcome to today’s card, which is a fun and different take on stamping tulips with the Timeless Tulips Bundle! When it comes to flowers, I usually use Google Images when I’m looking for inspiration, which did give my inspiration for today’s card! I didn’t want to just stamp a color WW or VV cardstock, so I thought I would try colored cardstock just to see if it would even work, and I really liked it! I first tried stamping Poppy Parade ink on Mango Melody cardstock and then stamped on Petal Pink and So Saffron cardstocks, which gave me the tulips for this card because I really liked how the Poppy Parade ink looked slightly different with each cardstock.

The base layer for this card is Crumb Cake cardstock, cut at 4” x 4 ¾”, and embossed with the Basket Weave 3D Embossing Folder:

For the card front, you will need:

1. Stamp the large tulip in Poppy Parade ink on Mango Melody, Petal Pink, and So Saffron cardstocks and punch out with the coordinating punch.

2. Use the “straight” stem to stamp two times on Soft Sea Foam cardstock in Mossy Meadow ink. Fussy cut both out and then trim on stem down and cut the other one so that you have three stems at different lengths.

3. Use the leaf stamp to stamp on Soft Sea Foam cardstock in Mossy Meadow ink two times, once in Poppy Parade ink on Mango Melody cardstock, and then punch out with the coordinating punch.

4. Cut a 6” piece of Silver Metallic Edge Ribbon, color with the Dark Soft Sea Foam Stampin’ Blends, and then tie into a bow (use however much ribbon you need to tie into a bow):

5. Using the sentiment from the stamp set, use Petal Pink, So Saffron, and Mango Melody Stampin’ Write Markers only on the HAPPY, stamping on a piece of Whisper White cardstock, and then cut out with the second smallest Layering Squares Die.

On the embossed base layer, I first adhered two of the stems, the Mango Melody and Petal Pink tulips, the Mango Melody petal, and one of the leaves behind the Petal Pink tulip:

I then adhered the last stem, So Saffron tulip, and the last leaf:

Trim off the excess stems, adhere the bow with glue dots, and the sentiment with mini dimensionals. This completed piece is then adhered to a Soft Sea Foam cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside sentiment, cut a piece of Whisper White cardstock at 4” x 5 ½”, stamp the sentiment in Mossy Meadow ink, stamp the top of the stem in Mossy Meadow ink, and then stamp the medium tulip in Poppy Parade ink:

So, what do you think of the tulips? Do you like them stamped on colored cardstock or do you prefer Whisper White or Very Vanilla? Since tulips come in a variety of colors, you could even do tone-on-tone stamping with colored cardstock!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Timeless Tulips Get Well Card

Hello and welcome to today’s card, which features the Timeless Tulips Bundle! This distinktive stamp set not only has some great sentiments for different occasions, but also has a coordinating punch! This is a great way for you to build up your tulips without a lot of work! I chose to make this card a “get well card” because who wouldn’t love to get a beautiful card when you’re not feeling all that great! For the bouquet, I did some “fussy cutting”, which is pretty easy with this stamp set.

The base layer is this design from the 2019-2021 In Color 6” x 6” DSP in Terracotta Tile, cut at 4” x 5 ¼”:

For the card front, you will need:

1. Stamp the large tulip stamp in Calypso Coral ink on Whisper White cardstock two times and punch out with the coordinating punch.

2. Stamp the medium tulip in Terracotta Tile ink on Whisper White cardstock two times and fussy cut out.

3. Stamp the small tulip in Grapefruit Grove ink on Whisper White cardstock two times and fussy cut out.

4. Use enough Whisper White Polka Dot Tulle Ribbon to tie into a bow.

5. Stamp both stem stamps in Old Olive ink on Whisper White cardstock two times and fussy cut out.

6. Stamp each of the leaf stamps in Old Olive ink on Whisper White cardstock one time each, punch out the one coordinating leaf with the punch, and fussy cut the other two out.

7. Stamp the sentiment in Terracotta Tile ink on a ½” piece of Whisper White cardstock, snip off at the end, and use the Banner Triple Punch on the other end.

8. Use a ¾” x 1 ¾” piece of Old Olive cardstock for layering under the sentiment and use the Banner Triple Punch on one end.

First, I layered the stems where I wanted them and then adhered them with liquid glue:

Next, I adhered the two medium tulips with liquid glue and the small and large tulips with dimensionals:

I then adhered the other two tulips and one of the leaves with dimensionals:

Finally, I adhered the last two leaves with liquid glue:

The tulle bow is adhered to the “bouquet” with a dab of liquid glue, the sentiment pieces are adhered together, and then adhered to the base layer. This completed piece is adhered to an Old Olive cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Terracotta Tile ink, and adhere a ¾” strip of DSP along the bottom:

Don’t you just love this stamp set?? Especially since tulips come in a variety of colors, it is so easy to create a bouquet in your favorite colors! If you don’t like to fussy cut, it is very easy to stamp the stems and tulips and then build up with the punch for the large tulip and leaves! This bundle will be available for purchase starting January 3rd, so don’t forget to add this to your list for the 2020 Mini Catalog!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List