Thankful for you!

Hello and welcome to today’s card, which is a beautiful Thanksgiving card make with everything from the Annual Catalog! This card was a two-fold challenge for me, one-create a card with Terracotta Tile, and two-use products from the Annual Catalog. I will have to admit, figuring out colors to use with Terracotta Tile for a Fall/Thanksgiving themed card was more of a challenge! In the end, I love how Terracotta Tile pairs with Merry Merlot and adding just a pop of yellow and green keeps the fall theme!

The base layer for this card is Whisper White cardstock, cut at 4” x 5 ¼”, and then the next layer is this design in Terracotta Tile from the 2019-2021 In Colors 6” x 6” DSP, cut at 3 ¾” x 5”:

For the card front you will need:

1. On Old Olive cardstock, stamp the leaf in Mossy Meadow ink three times and punch out with the Leaf Punch.

2. Stamp the sentiment in Merry Merlot ink on Whisper White cardstock and cut out with the third largest rectangle from the Rectangle Stitched Framelits Dies. Use the second largest rectangle to cut out a layering piece on Merry Merlot cardstock.

3. On Whisper White cardstock, stamp the first flower stamp in Terracotta Tile ink, use a sponge dauber with Merry Merlot ink on the detailed flower stamp, and use a sponge dauber with Daffodil Delight ink for the flower center to create two flowers. I fussy cut these out of the cardstock, use a sponge dauber with Terracotta Tile ink around the edges, and then lightly went over the whole flower with Wink of Stella:

Adhere the base layer and DSP together, adhere the sentiment and layering piece together, and then adhere the sentiment piece to the DSP:

I positioned the flowers around the sentiment piece and then inserted the leaves to where I wanted them underneath the flowers. I removed the flowers, adhered the leaves in place with glue dots, and then adhered the bottom flower with snail and the top flower with dimensionals:

This piece is then adhered to a Merry Merlot cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”. I added three of the copper Designer Elements along the bottom:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Merry Merlot ink, and then adhere a ½” strip of the same design DSP along the bottom, trimming off the excess (this from a 1” strip that I had from cutting the front piece, cutting in half):

Don’t you love the colors use for this card? They are “fall like” colors, but not typical colors you may use for your Fall/Thanksgiving cards and crafts. On top of all that, it was created with products that you probably already have on hand from the Annual Catalog! 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Happy Fall Harvest Card!

Hello and welcome to today’s card, which is a fun and colorful fall themed card! Have you checked out the Basic Pattern Decorative Masks in the 2019 Holiday Catalog? I used one of those masks to create this colorful background and combined it with stamps and dies from the 2019-2020 Annual Catalog! When I first created this background layer, I was really just experimenting with the masks to see what I could create with them, and since I liked this one so much, I completed a card with it! 

The base layer is Very Vanilla cardstock, cut at 4” x 5 ¼”. I first colored the cardstock with Sponge Brayers and Mango Melody, Pumpkin Pie, and Merry Merlot inks. I then placed the mask with the trees on top (use a piece of tape to secure the mask) and then used a Sponge Brayer with Early Espresso ink to color in the trees:

For the card front you will need:

1. Enough Linen Thread to tie around the base layer three times.

2. Stamp the sentiment in Early Espresso ink on Very Vanilla cardstock and then cut out with the second smallest rectangle die from the Rectangle Stitched Framelits.

3. Use the detailed leaf die from Seasonal Layers to cut out three leaves, one each from Mango Melody, Pumpkin Pie, and Merry Merlot cardstocks. Place a 4mm Gold Glitter Enamel Dot at the base of each leaf:

First start with wrapping the thread around the base layer three times, secure to the back with Snail, the sentiment is adhered on top of the thread with dimensionals and each of the leaves are adhered with a glue dot:

This completed piece is adhered to an Early Espresso cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Very Vanilla cardstock at 4” x 5 ¼”, stamp the sentiment in Early Espresso ink and the small leaves in Mango Melody, Pumpkin Pie, and Merry Merlot ink:

Isn’t this a stunning card that is so easy to make? I just love the colors used for this card and it was so easy to tie all of them together for the front and inside of the card! Decorative Masks are really a fun and easy way to create a background and then just add a sentiment!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Wishing you well

Hello and welcome to today’s card, which is a quick and easy card made from the Come to Gather Suite! I can honestly say that Stampin’ Up! hit it out of the park with the Come to Gather Suite for your fall themed cards and projects! I just love the rich jeweled toned colors used for the Designer Series Paper! Since this DSP is 12” x 12” and has 12 sheets (2 each of 6 double sided designs), you can use this one design of DSP to create 6 quick and easy cards!

The base layer is this design, cut at 4” x 5 ¼”:

For the card front you will need:

1. 2 pieces of Gold Shimmer Ribbon, each piece long enough to go across the DSP, horizontal and vertical.

2. Stamp the sentiment in Merry Merlot ink on Very Vanilla cardstock, use the second smallest rectangle die from the Stitched Rectangle Dies to cut out, and then use the background stamp in Sahara Sand ink to fill in.

3. Use the smallest leaf die to cut out of Gold Foil, Cajun Craze, and Merry Merlot cardstock. Before cutting, spritz the Cajun Craze and Merry Merlot cardstock with Champagne Mist Shimmer Paint (a spritzer filled with Rubbing Alcohol and a few drops of paint).

First start assembling the card front with the ribbon, use your grid paper to help keep the lines straight, use a small bit of snail on the back of the ribbon to adhere to the DSP, and then on the back of the DSP to adhere the ends of the ribbon:

The sentiment is adhered on top of the ribbon and then the leaves are adhered to the corner of the sentiment, fanning them out, but keeping the “stems” lined up:

This piece is then adhered to a Sahara Sand cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”. I added a large Gold Glitter Enamel Dot to the middle of where the stems meet:

For the inside sentiment, cut at piece of Very Vanilla cardstock at 4” x 5 ¼”, use the leaf stamp in Sahara Sand ink, stamp the sentiment in Merry Merlot ink, and then adhere a coordinating strip of DSP along the bottom, ¾” x 4”:

Isn’t this a great fall themed card?? I chose these sentiments because you can send a card to let the recipient know that you are thinking of them, for a variety of reasons, birthday, Thanksgiving, etc. With this simple layout, you can make 6 of these cards by cutting your 12” x 12” DSP like this:

1. Figure out the direction (if it matters) you want your DSP-horizontal or vertical, then cut 1 ½” off the bottom. Measurement: 1 ½” x 12” and 10 ½” x 12”.

2.  Take the 10 ½” x 12” piece of DSP and cut at 4” along the 12” side of the DSP. Measurement: 4” x 10 ½” and 8” x 10 ½”.

3. Take that 4” x 10 ½” and cut it in half along the 10 ½” side. This will give you two pieces measuring 4” x 5 ¼”. 

4. Repeat on the 8” x 10 ½” piece of DSP, cutting at 4”, and then at 5 ¼”. You will have six pieces of DSP measuring 4” x 5 ¼”.

5. Cut at 1 ½” x 12” strip of DSP at 4”, giving your three pieces measuring 1 ½” x 4”.

5. Cut the 1 ½” x 4” piece in half along the 1 ½” side, this will give you two pieces measuring ¾” x 4”. Repeat this step on the rest of the strips and you will have six pieces measuring ¾” x 4”.

This basic cut is a great way to use up that DSP (no more hoarding!) and you can dress the card front up or down with other products (punches, dies, ribbon, embellishments) without trying to figure out how to use up a whole bunch of little pieces! You can even take two of the base layers, cut them each diagonally, and use each side of the DSP design! Even easier is to use one piece and measure a cut across and flip one side over! So many easy possibilities!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Fun alternative with the new Mercury Glass Acetate Sheets!

Hello and welcome to today’s card, which pairs the Sea of Textures stamp set and Under the Sea dies with the Mercury Glass Acetate sheet, which will be available September 4thfrom the Holiday Catalog! These super cool acetate sheets come in four sheets, two sheets each of two designs, with a faux mercury glass finish! These are perfect to give your holiday cards and crafts a different look, but I thought about what you could use them with outside of the holiday catalog? One design is more of a “cracked glass” and the other design is more of a “splatter/bubble”, so I thought it would be fun to pair this with the Sea of Textures stamp set and coordinating dies! 

The base layer is this design of the acetate sheets, cut at 4” x 5 ¼”. TIP-the back of the acetate has a thin layer of film and should be removed:

For the frame, I cut a piece of Soft Sea Foam cardstock at 4” x 5 ¼” and used the third largest mat frame from the Rectangle Stitched Framelits (keep that cut out center piece for another project!):

For the card, you will need the following: 

1. stamp the octopus on Whisper White cardstock, inking in Soft Sea Foam and then use a sponge dauber with Granny Apply Green ink around the edge.

2. use the seagrass die to cut out 2 each of Soft Sea Foam and Granny Apple Green cardstock.

3. use the coral die to cut out two from Vellum cardstock, stamp the coral stamp twice in Calypso Coral ink on Calypso Coral cardstock and cut out with the coordinating die. 

4. stamp the sentiment in Calypso Coral ink on Whisper White cardstock and cut out with the single non-layering Rectangle Stitched Framelit.

5. Use the large and small sand dollar die to cut out one each in Very Vanilla cardstock, use a sponge with Champagne Mist Shimmer Paint, and then color the starfish with a Terracotta Tile Stampin’ Write Marker.

6. Use the Classic Label Punch to create a “post” with Crumb Cake cardstock.

You will need to put aside the sentiment, post, sand dollar, starfish, and coral, these will be for the inside:

Stamp the seagrass on each side in Granny Apple Green ink, adhere the octopus so that it’s just under the frame to the acetate, and then adhere the frame on top:

I used the Fine Tip Glue Pen to adhere the seagrass in each corner, the stamped coral piece in the left corner, the vellum coral and starfish in the right corner, and the sand dollar to the upper right corner:

This completed piece is adhered to a Soft Sea Foam cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

I used the Fine Tip Glue Pen to adhere the leftover pieces in the bottom left corner:

Don’t you just love this new Mercury Glass Acetate?? This is super fun to use and definitely gives your cards and crafts a new look!! 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

CASEing the catalog with High Tide

Hello and welcome to today’s card that I CASE’d from the Annual Catalog using the High Tide stamp set! I know we get all excited about new products from the Annual Catalog and with the Holiday Catalog right around the corner, I thought about creating a card that has a little of the old (carried over stamp set) and a little new (embossing folder from the Annual Catalog) and what better way to get inspiration and ideas than fromthe Annual Catalog. For me, the word CASE means to Copy And Share Everything and also Copy And Selectively Edit, so I edited this card to create my version. The card on page 153 in the Annual Catalog is made with watercolor paper and colored with the aqua painters and since I’m waiting on my watercolor paper to arrive, I thought I would recreate it with stamping and sponging!

The base layer is Whisper White cardstock, cut at 3 ½” x 4 ¾”. I placed a mask over the bottom half, at 2 ¾” from the bottom, and used a sponge brayer with Daffodil Delight ink to start creating the sky:

I used the 1 ½” Circle Punch to create a mask for the sun, coloring the sun in with Crushed Curry ink and a sponge dauber. I then used the half circle punch out to mask the sun and created the “sun rays” with the light stamp in Crushed Curry ink. I did have to stamp each ray twice, this was very easy to do since this is a photopolymer stamp set:

I removed the masks and then used the sponge dauber with the leftover Crushed Curry ink to color in a little bit more around the sun. I placed the mask over the sun, leaving the yellow line just slightly showing for better color blending, and then used another sponge brayer with Balmy Blue ink:

I removed that mask layer and then used the wave stamp in Seaside Spray ink, full strength across at the line, and stamping off once across under that. I used the small little reflection line stamp randomly around the bottom in Seaside Spray ink, stamping off once first. I used my Stamparatus to stamp the birds in Gray Granite ink, inking and stamping three times:

Additionally, you will use a 4” x 5 ¼” piece of Vellum cardstock embossed with the High Seas 3D embossing folder (a piece of cardstock is underneath so you can see the embossing), enough linen thread to wrap around the stamped cardstock twice and tie into a bow, and stamp the sentiment in Gray Granite ink on Whisper White cardstock, cutting out with the second from the smallest mat die from Stitched Rectangle Dies, tearing the paper along the bottom:

I wrapped the linen thread around the cardstock at the water/sun line twice, tied into a bow, and then adhered the sentiment:

I adhered the cardstock with dimensionals to the Vellum and then placed adhesive behind that to adhere to a Balmy Blue cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

For the inside, use a 4” x 5 ¼” piece of Whisper White cardstock, used the end of the sand (or ground cover) stamp for the lighthouse in Sahara Sand ink, stamped the birds in Gray Granite ink, and the waves in Seaside Spray ink:

Wasn’t that a fun card?? Have you ever saw a card or project thought, “How’d they do that?”? It can be very easy to CASE, even if you have to improvise as I did! Be sure to check out all the inspiration from the annual catalog and create those beautiful projects!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Tropical Sailing Home card

Hello and welcome to today’s card, which is a fun alternative made with the Sailing Home stamp set and Smooth Sailing dies! While the Come Sail Away Suite is one of my favorites, I really wanted to create a fun card with a tropical flair, but keeping it fairly simple. I did experiment with how to create the background with Stampin’ Blends, water coloring, and ink refills, I chose to use a drop of ink from the ink refills on a clear block because I liked this result the best! Add some tropical colored flowers and Viola! Tropical Sailing Home card!

For the base layer, I used a piece of Thick Whisper White cardstock, cut at 4” x 5 ¼”, and stamped the bigger sailboat in Gray Granite ink. Note-I just placed an order and it included the new watercolor paper, but it has not arrived yet and Thick WWCS is a great alternative:

I used my clear E block with a drop of Blueberry Bushel, Pineapple Punch, Pumpkin Pie, and Calypso Coral ink refills, my aqua painter to spread the ink, and then spritzed with water. I already cut a mask for the sailboat, so then I just flipped the block over, making sure the Blueberry Bushel ink was around and below the sailboat, onto the Thick WWCS:

I wanted to “frame” the sailboat, so I used the fourth and fifth mat dies from the Stitched Rectangle Dies (first is the largest mat die) to cut out of Whisper White cardstock. I used the flower and leaf stamps from Butterfly Wishes, stamping the leaf in Granny Apple Green ink and the flowers in Pumpkin Pie and Calypso Coral inks, first in Pumpkin Pie and then the “rock-n-roll” technique with Calypso Coral, then fussy cutting out:

I used glue dots to layer and adhere the flowers and leaves into a cluster, then adhered to the frame with liquid glue:

The frame is adhered to the based layer with liquid glue and then the base layer is adhered with dimensionals to a Calypso Coral cardstock card base, cut at 4 ¼” x 11” and scored at 5 ½”:

To tie the inside to the card front, cut a piece of Whisper White cardstock at 4” x 5 ¼”, create a mask for the flower, and stamp the leaves and flowers the same as the card front in the bottom corner:

Wasn’t that a fun tropical alternative?? I’m not big on fussy cutting, but the flower and leaf from Butterfly Wishes was very easy to cut, but you could easily substitute for any flower stamp and die you may have! If you don’t have the ink refills, you could substitute by using your stamp pad directly on the block and just “blend” the ink with your aqua painter.

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Floral Essence, Vellum Cardstock, and Watercolor Pencils

Hello and welcome to today’s card, which is a bright and cheerful card made from the Perennial Essence Suite! Sometimes a card starts with just a piece of designer series paper and what better DSP than the Perennial Essence DSP? When I first received this DSP, I cut some of it up so I would have 4” x 5 ¼” pieces ready to go. Even though this DSP looks more like it was painted on, I thought I would try to incorporate making a watercolor flower. Remember last fall SU! introduced Watercolor Pencils Assortment 2? They were a “special purchase” and I thought for sure they would wind up in a catalog, but then they just disappeared….Well, they are back in the 2019-2020 Annual Catalog and I used a couple of these to color in the vellum flower on the card front!

I used Vellum cardstock to heat emboss the flower from Floral Essence in gold, colored the center of the flower with Crushed Curry and the outer petals with Flirty Flamingo Watercolor Pencil, using my Blender Pen to fill in the coloring. (I put a piece of Whisper White cardstock behind the flower so you could see it a little better):

For the card front, I fussy cut the flower out of the vellum, used this design from the DSP cut at 4” x 5 ¼”, used the fourth largest layering Stitched Rectangle die to cut out of the So Saffron Vellum, and stamped the sentiment in Flirty Flamingo ink, cutting out with the second largest rectangle Stitched Rectangle die (the sentiment should be in the bottom right side):

There’s a couple ways to adhere the vellum to the DSP, you can use liquid glue and a sponge to spread on the backside or you can hide snail behind the sentiment piece and use glue dots in the corners (I have embellishments that I’m using that will hide these) or if you have the adhesive sheets left over from the previous catalog, you can cut a piece and use that. I adhered the vellum to the DSP, aligning to the left bottom corner, and then adhered the sentiment across, close to the bottom of the vellum:

The base layer is adhered to a So Saffron card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”. I used liquid glue to adhere the vellum flower to the sentiment piece and placed a Perennial Essence Flower Center in the center. In three of the corners of the vellum piece, I used the gold Designer Elements:

The inside is Whisper White cardstock, cut at 4” x 5 ¼”, the sentiment is in Flirty Flamingo ink, and the flowers are in So Saffron ink:

Isn’t this a fun card?? As I was putting the card together, the vellum flower started to curl (from the blender pen), so I just used my finger to flatten it out a bit. I was so happy that SU! brought the second assortment of watercolor pencils back! Now you have more core colors to choose from, including some from the color revamp!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List