Peaceful Poppies Tri-Fold Shaker Card!

Hello and welcome to today’s card, which features the Peaceful Poppies Suite for this super fun tri-fold shaker card! So, I’ve been thinking lately that it’s time to change things up and do a fun fold card, but I hadn’t quite figured out what one I really wanted to share with you. Well, the other day I saw a YouTube video from Jennifer McGuire and I loved it! So, this layout is a CASE (copy and share everything or copy and selectively edit) from her video, which I will provide a link to that video at the end of this post, that I used with the Peaceful Poppies Suite! Sometimes the struggle with making a shaker card can be much, I personally have issues with the foam strips and lining the “frame” up, so if you are like me or maybe you just want to try making a shaker card, this card is a great alternative!

In Jennifer’s video, she actually stamps a scenery, but I thought this design from the Peaceful Poppies DSP would work perfectly for the inside fold. Since this will be a full 4 ¼” x 5 ½” piece, I first cut the sheet of DSP at 4 ¼” and then lined the bottom up at 5 ½” to cut. I lined the second piece of DSP the same, which left me with a small 1” x 4 ¼” strip of the DSP left over:

You will need two card base layers in Basic Black cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”(one sheet of cardstock). After burnishing the score line with your bone folder, you will use one of the card bases with the front opening to your right (or the card fold on the right side) and adhere the DSP with liquid glue:

To make the frames, cut a full sheet of Basic Black cardstock into four 4 ¼” x 5 ½” pieces. From the Stitched Rectangle Dies, use the second largest layering die to cut out. I found it helpful to use my grid paper to help line up the die so that it was even and I also used some craft tape to keep the die in place:

Now you will take the other card base and use the die to cut out a frame from the cardstock. You can still use your grid paper to make sure that it is lined up evenly and use craft tape to keep the die in place:

You will now adhere three of the frame layers together using liquid glue, I used my fingers to “flatten out” the layers to make sure they are flat and evenly adhered together:

Cut two pieces of the Window Sheets at 4 3/16” and 5 7/16”, or the small line right before 4 ¼” and 5 ½” on your trimmer, so they are just slightly smaller than 4 ¼” x 5 ½”:

On the card base with the cut out frame, use Tear & Tape on the front, along each side, remove the backing, and lay one of the Window Sheets on top of the adhesive:

Use another layer of Tear & Tape on top of that same Window Sheet, remove the backing, and place the triple layer frame on top:

Use your Embossing Buddy on the Window Sheet to remove any static and pour some of the Peaceful Poppies Sequins onto the Window Sheet. I place four drops of the Fine Tip Glue Pen on the Window Sheet and then put a sequin on each drop. You will then want to set this aside to allow the glue to dry:

Take the fourth (or left over) cut out frame and place Tear & Tape on the backside, along each side, remove the backing, and place the second Window Sheet on the adhesive, use your Embossing Buddy again to remove any static. On the card base frame, you will want to use another layer of Tear & Tape along each side, remove the backing, and place the top frame layer on top. This will now give you a “shaker card” without the foam strip:

Now you will want to adhere the two back layers of the base cards together with liquid glue, making sure that the DSP front closes to the left and the shaker front closes to the right:

This is what your card folded closed should look like:

For the card front, I stamped the sentiment in Poppy Parade ink on Whisper White cardstock and cut out with the coordinating die. I also cut out four small leaves in Old Olive cardstock and four flower buds, two in Poppy Parade and Blackberry Bliss cardstock, using glue dots to adhere to the leaves:

I used liquid glue to adhere the sentiment and flower buds along the bottom corner, this way you will not see any adhesive on the window sheet:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Poppy Parade ink, the flower stamp along the bottom in Memento ink (you will do this twice to fill in along the bottom), and color in the flowers with Dark Poppy Parade and Dark Blackberry Bliss Stampin’ Blends:

Isn’t this a super cute and fun card?? If you would like to see Jennifer McGuire’s video, click here. The whole purpose of creating all these frames is so that it gives you that space you need for the sequins to move around between the window sheets. Don’t throw away those inside pieces from the die cuts! Those will make perfect framing layers for future cards. Now, here is some “words of wisdom” that I can pass along to you before you set out to make this card: using the largest layering die may look easier, but it’s not best to use that die, but the second largest die instead. When you use the largest die, there is only an 1/8” of an inch along each side and the Tear & Tape is ¼”, which is too wide, and you definitely need to use Tear & Tape for the Window Sheet pieces, Multipurpose Glue will be too messy and the Fine Tip Glue Pen glue will not adhere Window Sheets together. I personally have some 1/8” tape (you can find this at a big box craft store) but I’m not going to make a card that you may not have Stampin’ Up! products on hand for. I discovered this mistake after I started using the largest layering Stitched Rectangle Die, so I put those pieces aside and started over with the second largest Stitched Rectangle Die. I did go back and finish that card, so here are the two side by side:

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

#simplestamping with Painted Poppies!

Hello and welcome to today’s card, which is a quick and easy #simplestamping card featuring the Painted Poppies stamp set! What makes this a #simplestamping card? It is created with just using ink, paper, and stamps! The card I’m sharing with you today is to not only show you how easy it is, but also a great way to pair it with the Peaceful Moments stamp set to send to someone for any occasion. I just love the Blackberry Bliss and Purple Posy color combination, so for this card I wanted to use both of these colors and add a splash of Rococo Rose.

For the card front, you will need:

1. Cut a piece of Purple Posy cardstock for the base layer at 4” x 5 ¼”. I used the large splatter stamp from Painted Poppies in Highland Heather ink, stamping off first, and the small splatter stamp in Blackberry Bliss ink.

2. Cut a piece of Whisper White cardstock at 2” x 3” and stamp the flower stamp in Memento ink. I used Dark Purple Posy, Dark Rococo Rose, and Dark Blackberry Bliss Stampin’ Blends to color in the flowers.

3. Cut a piece of Blackberry Bliss cardstock at 2 ¼” x 3 ¼”, this will be layered under the Whisper White cardstock piece.

The card base is Blackberry Bliss cardstock, cut at 4 ¼”x 11”, and scored at 5 ½”. Adhere the Purple Posy base layer to the card base and then adhere the layered flower piece in the middle with dimensionals:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Blackberry Bliss ink, and stamp the top of the flower stamp (used on the card front) in Memento ink along the bottom, coloring in the same as the card front:

Quick and easy card to make! That’s what makes this #simplestamping! Sending cards shouldn’t just be about holidays or special occasions, just letting someone know that you are thinking of them by sending a card can truly make their day! It is so easy to get caught up making those “wow” cards, but sometimes we also need inspiration for those “10 minutes or less” cards!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List