So grateful!

Hello and welcome to today’s card, which is a bright and shimmery Thanksgiving card! I recently shared a card that I used the Celestial Copper Metallic Ink on the Gathered Leaves Dies when embossing/cutting the leaves and I wanted to make another card, but this time with the Golden Glitz Metallic Ink and the Nature’s Roots Dies. What better way to make a stunning card than with some foil and shimmery ink? 

The base layer is this design from the Noble Peacock Specialty DSP, cut at 4” x 5 ¼” (horizontal cut):

For the card front you will need:

1. 5 ¼” piece of Burlap Ribbon.

2. On Very Vanilla cardstock, stamp the sentiment in Golden Glitz Metallic Ink and cut out with the second largest square from the Stitched Shapes Framelits.

3. On Old Olive cardstock, stamped the branch stamp in Mossy Meadow ink two times, cut out with the coordinating die, and then cut out two more pieces from the Gold Foil Sheets.

4. Use the small leaf embossing and cutting dies to cut two leaves from the Gold Foil Sheets. Tip-if you did not know, the embossing and cutting dies layer together so you cut and emboss at the same time.

5. Use the large leaf embossing and cutting dies to cut out one each of Terracotta Tile and Merry Merlot cardstocks. Before cutting/embossing, ink up the embossing leaf in Golden Glitz Metallic Ink, there will be enough ink for both leaves. Tip-To keep the embossing die and cutting die in place, use a post it note or a small piece of masking/painters tape over both dies when placing on top of the cardstock:

To assemble the leaves and branches, use glue dots to layer the branches and then to adhere the branches to the cardstock leaves:

Use Tear & Tape to adhere the Burlap Ribbon to the DSP, adhere the Stitched Shapes square in the middle with dimensionals, and then use glue dots to adhere the leaves around the sentiment:

This completed piece is adhered to a Crumb Cake cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

For the inside sentiment, cut a piece of Very Vanilla cardstock at 4” x 5 ¼”, stamp the sentiment in Mossy Meadow ink, stamp the large leaf in Terracotta Tile and Merry Merlot inks, and stamp the small leaf twice in Golden Glitz Metallic Ink:

This is another beautiful Thanksgiving card made with products from the Annual Catalog, aside from the metallic ink! I just love the added detail to the leaves with the metallic ink and clean-up is a snap, just rinse the die with water in the sink and dry thoroughly.

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Lovely Royal Peacock card!

Hello and welcome to today’s card, which features the Royal Peacock Bundle! What is so awesome about this bundle is that you can make a card for just about any occasion! You can keep it simple or really dress it up, so I thought today I would show you a fun way to dress it up and carefully add color with Stampin’ Blends! You can google peacock images to get some inspiration, so today I chose to use Blueberry Bushel, Pretty Peacock, and Gray Granit for this color combination.

The base layer for the card front is this design from the Noble Peacock Specialty DSP, cut at 4” x 5 ¼”:

For the peacock, I stamped it in Pretty Peacock ink on Whisper White cardstock and then stamped the accent “feathers” in Blueberry Bushel ink, cutting out with the coordinating die. TIP-This is a two-step stamp set, so using your Stamparatus helps lining up the accent “feathers” stamp. I then colored the breast and top of the head feathers in with Light Night of Navy Stampin’ Blends, the rest of the body with Light Gray Granite Stampin’ Blends, and for the train, the eye spots are colored with Light Old Olive and Light Pretty Peacock Stampin’ Blends:

Additionally for the card front, you will need 11” of the reversible ribbon, cut two of the feathers out of Blueberry Bushel cardstock, two of the smaller leaves out of Pretty Peacock cardstock, and the larger leaf die from Gray Granite cardstock, and from the Layering Circles Dies, use the fourth from the smallest to cut a piece of Pretty Peacock cardstock and use the “emboss” die from the Stitched Labels Dies, this will be layered on Gray Granite cardstock, cut out with the fourth from the smallest scalloped Layering Circle Die:

I assembled the cut out feather and leaf pieces how I wanted them, put adhesive on the back of the layered circle cardstock, and placed on top, in the center (I found this the easiest way to assemble this piece):

I adhered the peacock to the layered circle cardstock and then placed the ribbon on the back:

I adhered this completed piece with dimensionals to the base layer and then this is adhered to a Gray Granite cardstock card base, cut at 4 ¼” x 11” and scored at 5 ½”. I colored the smallest Rhinestone Gem with the Light Night of Navy Blend and then used it for the peacock’s eye:

The inside is on Whisper White cardstock, cut at 4” x 5 ¼”, the sentiment is from Forever Lovely stamped in Pretty Peacock ink, and the flower accents are stamped in Pretty Peacock ink and colored in with Light Night of Navy Stampin’ Blends:

Isn’t this an awesome bundle?? This is a great way to make a beautiful card with new products from the Annual Catalog, but also incorporate a stamp set that you already have! 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Colorful Royal Peacock card

Hello and welcome to today’s card, which is a fun and colorful card featuring products from the Noble Peacock Suite! What is so fun about the stamp set and coordinating dies, is that you can stamp and color a peacock one way or you can use the detailed die to create another! So, I thought I would use my sponge brayers to create my own colors to cut out with the detailed die! 

Since I wanted my peacock to be shimmery, I used a piece of Shimmery White cardstock cut at 4” x 5 ¾” (this is more than enough to cut out the peacock and two of the big feathers). I then used my Sponge Brayer with Lovely Lipstick, Blueberry Bushel, and Pretty Peacock inks:

I used the detailed peacock die to cut out of the cardstock, positioning the die so that the top is right at the Lovely Lipstick colored part:

The base layer is this design from the Noble Peacock Specialty DSP, cut at 4” x 5 ¼”:

The next layer is a Silver Foil Sheet, cut at 3 ½” x 4 ¾”, and then the top layer is Blueberry Bushel cardstock, cut at 3 ¼” x 4 ½”, and embossed with the Beads & Baubles Embossing Folder:

For the card front you will need the detailed peacock, use the larger circle die from the Stitched Labels Dies from the Silver Foil, and the peacock feather cut out of the same colored paper for the detailed peacock:

I adhered the layers of DSP and cardstock together:

The peacock is adhered to the silver circle to look like it is sitting on the circle with my fine tip glue pen:

The feathers are adhered behind the silver foil circle and then is adhered to the layered paper with dimensionals:

This completed piece is then adhered to a Blueberry Bushel cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”. I decided I wanted to add some pearls, so I colored two of the large pearls with Dark Pretty Peacock and one large pearl with Dark Night of Navy Stampin’ Blends:

The inside is on Whisper White cardstock, cut at 4” x 5 ¼”, the sentiment from Itty Bitty Birthdays and the accent feather stamp are both stamped in Blueberry Bushel ink:

Don’t you just love this detailed die?? This suite was #2 on my “must have” list, everything is just so bright and shiny!! There are so many different creations you can make with this suite, with or without the peacocks!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Congratulations card from the Noble Peacock Suite

Hello and welcome to today’s card, which is a fun alternative card made with products from the Noble Peacock Suite! But wait, where’s the peacock?? Don’t worry, those cards will be coming soon, however I thought this card is a fun way to feature the Noble Peacock Specialty DSP! I just love how Terracotta Tile stands out against the Old Olive Foil DSP.

The base layer is this design from the DSP, cut at 4” x 5 ¼”:

For the rest of the card front, you will stamp the sentiment in Old Olive ink on Very Vanilla cardstock and cut out with the third largest stitched circle framelit, use the largest Stitched Labels die to cut out of Terracotta Tile cardstock, two of the leaf dies in Crumb Cake Cardstock (two of the dies are the same and one is slightly different), the other leaf die in Old Olive cardstock, two pieces of Braided Linen Trim cut at 7”, and a piece of Scalloped Lace Trim cut at 15”:

I used some snail to help adhere the lace trim to the base layer, making a “Z”:

I used a little more snail to adhere the linen trim going diagonally across the base layer, placing it where the sentiment will cover:

The leaves (or maybe they are sprigs?) are adhered behind the sentiment piece and then adhered to the base layer with dimensionals. This completed piece is then adhered to a Crumb Cake cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

The inside is a 4” x 5 ¼” piece of Very Vanilla cardstock, the sentiment is stamped in Old Olive ink, and the flowers are stamped in Terracotta Tile ink:

Isn’t this a gorgeous card?? There’s nothing like making an over-the-top card congratulating someone!! While this suite was #2 on my “must have” list (Sailing Home was #1) and even if this really doesn’t appeal to you, you should definitely check out the Specialty DSP because it’s just stunning! You can definitely use this for a variety of card making!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List