Christmas in July Blog Hop!

fullsizeoutput_2245

Hello and welcome to the Stamp It Group’s Christmas in July Blog Hop!! Even though Christmas is a few months away, it’s never too early to get some great inspiration and ideas from all the talented ladies in this blog hop! For the card I created today, I wanted to go outside the typical Cherry Cobbler/Garden Green and Real Red/Old Olive color combinations and used Poppy Parade and Call Me Clover! I also used the Snowflake Sentiments stamp set and the Swirly Snowflakes Thinlits Dies, which were carried over from the 2017 Holiday Catalog to the 2018-2019 Annual Catalog. This was one of my favorite Christmas sets from the Holiday Catalog, so I was excited to see it carried over!!

The card base is Call Me Clover cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”. I used the edge die from the Swirly Snowflakes Thinlits Dies along the bottom of the card front:

fullsizeoutput_221e

The base layer is from the Brights 6” x 6” DSP in Poppy Parade and white stripes, cut at 4” x 5 ¼”:

fullsizeoutput_2221

The next layer is Call Me Clover cardstock, cut at 3 ¼” x 4 ½”, use the same edge die from the card front, and used the largest oval die from the Layering Ovals Dies:

fullsizeoutput_2224

The last layer is another piece of DSP in Poppy Parade and white dots, cut at 3” x 4 ¼”:

fullsizeoutput_2227

The front sentiment is from the Snowflake Sentiments stamped in Poppy Parade on a piece of Whisper White cardstock and then cut out with the largest oval from the Stitched Shapes Framelits. This is then adhered to the Call Me Clover oval:

fullsizeoutput_222a

The snowflakes from the dies are cut out with Sparkle Glimmer Paper and a piece of Poppy Parade cardstock cut at ½” x 5 ½”, which is adhered to the inside of the card:

fullsizeoutput_222dfullsizeoutput_2230

The DSP is adhered to the Call Me Clover cardstock, tie a bow around this with a piece of 1/8” Sheer Ribbon in Whisper White, and then adhere the sentiment with dimensionals:

fullsizeoutput_2233

The DSP base layer is adhered to the card base, and then use dimensionals to adhere the sentiment piece:

fullsizeoutput_2236

I used three of the sparkle snowflakes around the sentiment that are adhered with glue dots:

fullsizeoutput_2239

The inside sentiment is on a piece of 4” x 5 ¼” Whisper White cardstock, stamped in Call Me Clover ink. I used the three remaining sparkle snowflakes around the sentiment with glue dots and then stamped the three-snowflake stamp along the bottom in Poppy Parade ink:

fullsizeoutput_223cfullsizeoutput_223f

Don’t you love the Poppy Parade and Call Me Clover color combo for Christmas?? With the color revamp this year, what new colors would you create to use for the holidays? How about Merry Merlot and Shaded Spruce? Lovely Lipstick and Granny Apple Green? Blackberry Bliss and Mossy Meadow?

Wondering what specials are going on?? Current specials are listed to the right!!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, or joining my team!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

This month’s contest:

Last month’s winner:

Congratulations Julie Schoonover!!

Don’t forget to scroll down to leave your name and a comment with #stampitcontest and keep on hopping to the next name on the Blog Hop tour:

BLOG HOPPERS

1. Tami White
2. Pam Nichols
3. Tina Wardell
4. Linda Cullen
5. Liz Holloway
6. Rachel Nichols
7. Christina Miller
8. Carol Tennant
9. Lori Mueller
10. Gianna Melone-Sardella
11. Kathi Desmarais
12. Marie A Moreken
13. Rachael Rife

 


Product List

Castle Easel Card

Hello and welcome to today’s card, which is part 5 of Myths & Magic Suite Week! For this week’s final card, I thought I would create a castle scene with an Easel Card! It’s been a while since I made an Easel Card, but I thought this would be fun to make into a castle scene! If you’ve never made an Easel Card, it’s actually very easy to make and it can be for any occasion.

The card base is Thich Whisper White cardstock, cut at 4 ¼” x 11”, and scored at 2 ¾” and at 5 ½”:

fullsizeoutput_1c72

After you burnish the score lines, the card will look like this:

fullsizeoutput_1c75

The base layer is from the Myths & Magic Specialty DSP, cut at 4” x 5 ¼”:

fullsizeoutput_1c78

I cut a piece of Smoky Slate cardstock to 3” x 4” and embossed this with the Brick Wall Embossing Folder, adding Smoky Slate ink to the embossing folder first. The top of the castle is DSP cut at 1 ½” x 4”, using the Classic Label Punch, and the “drawbridge” is a piece of Wood Textures DSP Stack, cut out with the 3rdsmallest Layering Squares Framelit:

fullsizeoutput_1c7b

On a piece of Whisper White cardstock, stamp the dragon, flame, knight, and mermaid in Memento ink. These are colored in with Light Lovely Lipstick, Ivory, Light Cherry Cobbler, Light Pumpkin Pie, Dark Crumb Cake, Light & Dark Old Olive, Light & Dark Daffodil Delight, Light & Dark Night of Navy, Light & Dark Smoky Slate, and the Color Lifter from the Stampin’ Blends. These are then cut out with the coordinating framelits, I snipped the mermaid’s tail off because she will be a princess in this scene:

fullsizeoutput_1c7e

I adhered the embossed cardstock and the DSP together and placed the princess peeking out from up top:

fullsizeoutput_1c81

The drawbridge is attached and then I added Black Sequin Jewels at the top:

fullsizeoutput_1c84

This piece is then adhered to the DSP base layer with dimensionals:

fullsizeoutput_1c87

The dragon, fire, and knight are adhered with dimensionals:

fullsizeoutput_1c8a

I used the leaf framelits on the light green 6” x 6” Glimmer Paper and adhered these pieces with liquid glue:

fullsizeoutput_1c8d

I cut this design of DSP to 2 ½” x 4”:
fullsizeoutput_1c90

On a piece of Whisper White cardstock, I stamped the sentiment in Lemon Lime Twist ink and then sponged Old Olive ink around the edge with a Sponge Dauber. This is then cut out with the 5thlarges oval from the Layering Ovals Framelits Dies and the leaves are adhered behind with liquid glue:

fullsizeoutput_1c93

The base layer is adhered to the card base on the lower (or bottom) scored piece:

fullsizeoutput_1c97

What would normally be the inside of the card, this piece of DSP is adhered to the lower bottom:

fullsizeoutput_1c9a

Then the sentiment is adhered to this piece with dimensionals:

fullsizeoutput_1c9d

You have room to write your sentiment above this or you have the backside, which is 4” x 5 ¼”!

Don’t forget, the Magical Day stamp set, Myths & Magic Specialty DSP, Myth & Magic 6” x 6” Glimmer Paper, and the Brick Wall Embossing Folder are on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store while supplies last!!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Sea of Mermaids

Hello and welcome to the start of a new week and a new theme, the Myths & Magic Suite! When I first saw this suite in the 2018 Occasions Catalog, this was on my “must” list! I saw so much fun and creativity with everything in this suite, I couldn’t wait to order it! I’ve created a few things so far (One of a Kind, Glitter, Unicorns, and Rainbows, and Triple W Fold Card), so before these products are gone forever (yes, all the products from this suite will be retired May 31st) I wanted to get one last week in!!

The card base is Dapper Denim cardstock cut at 5 ½” x 8 ½” and scored at 4 ¼”:

fullsizeoutput_1bf7

The base layer is Whisper White cardstock cut at 4” x 5 ¼”, Soft Sky ink is sponged on the upper half. The clouds are from the Myths & Magic 6” x 6” Glimmer Paper in iridescent, punched out with the Tree Builder Punch:

fullsizeoutput_1bee

I chose to start with this DSP from the Color Theory Designer Series Paper Stack in Dapper Denim:

fullsizeoutput_1be5

Even though the Magical Mates Framelits Dies come with a smaller “wave” die, I wanted them to be bigger and used the one from the Seasonal Layers Thinlits Dies. The die is placed at the top of each color change and then I trimmed the white off the end:

On a piece of Whisper White cardstock, stamp the mermaid image three times in Memento ink. The mermaid bodies are colored in with Stampin’ Blends, Light and Dark Pool Party, Light and Dark Smoky Slate, and Light and Dark Night of Navy. The face and arms are colored in with Ivory and the hair is colored in with Light and Dark Crumb Cake, Light Pumpkin Pie and Dark Calypso Coral, and Dark Pink Pirouette and Light Lovely Lipstick Stampin’ Blends. Wink of Stella is brushed on the body and the eyelids and then cut out with the coordinating die:

fullsizeoutput_1bf1fullsizeoutput_1bf4

To place the Dapper Denim waves on the base layer, I placed my ruler at the 3” mark across the cardstock and then adhered the first layer. I did this so that it would be straight across and lining up the other pieces would be easy:

fullsizeoutput_1bfa

Starting with the second wave layer, adhere with Mini Dimensionals and then adhere one of the mermaids, doing this for the third and fourth layers. The final layer, adhere Dimensionals along the bottom of the base layer and then place the wave layer on top. I used scissors to trim the pieces that overlapped the card base:

I used Glitter Enamel Dots in Dapper Denim to make it look like bubbles coming up from the waves:

fullsizeoutput_1c06

I cut one of the glimmer clouds in half, adhered those to each edge, and then adhered the remaining cloud with Dimensionals. This completed piece is then adhered to the card base:

fullsizeoutput_1c09

The inside sentiment from Magical Day stamp set is stamped on a piece of Whisper White cardstock, cut at 4” x 5 ¼”, the bubbles are stamped in Dapper Denim ink, the seahorses are stamped in Memento ink, and then colored in with Light and Dark Old Olive, Light and Dark Smoky Slate, Light and Dark Pool Party, and Light and Dark Crumb Cake Stampin’ Blends:

fullsizeoutput_1c0d

Don’t forget, the Magical Day stamp set, Magical Mates, Color Theory DSP Stack, and Glitter Enamel Dots are on the Retirement List! If you would like to purchase any of these products, simply click on the product list below and you will find them on my Online Store, while supplies last!! You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s card inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Happy Wishes

Hello and welcome to part 5 of this week’s Sale-A-Bration spotlight on stamp sets! Today I created two quick and easy cards with the Happy Wishes stamp set! You can earn this free with a qualifying $100.00 order and if you are looking for a stamp set with lots of saying, this is it! But don’t delay, Sale-A-Bration ends tomorrow, Saturday March 31st!

Happy Day card:

The card base is Berry Burst cardstock, cut at 4 ¼” x 11”, scored at 5 ½”, and the base layer is Berry Burst Foil Frenzy Specialty DSP, cut at 4” x 5 ¼”.

From the Myths & Magic 6” x 6” Glimmer Paper, cut at piece of the iridescent paper 2” x 5 ¼” and punch the end out with the Banner Triple Punch.

On a piece of Whisper White cardstock, stamp the “happy” stamp in Basic Gray Archival ink, color the leaves with Pear Pizzazz Stampin’ Write Marker, and the flowers are colored in Blushing Bride, Berry Burst, and Rich Razzleberry inks. I used the Blushing Bride Stampin’ Write Marker but used a Blender Pen with the Berry Burst and Rich Razzleberry inks since the markers were too dark for me. The “day” sentiment was stamped in Berry Burst ink. This is then cut out with the 2nd largest Lots of Labels Thinlits and I used some Snail on the back to adhere some Silver Metallic Thread.

To put this card together, I adhered the glimmer paper with Fast Fuse to the Foil DSP layer, adhered that to the card base, and adhered the sentiment in the middle with Stampin’ Dimensionals.

fullsizeoutput_1644fullsizeoutput_1648

Best Wishes card:

The card base is in Tempting Turquoise cardstock, cut at 4 ¼” x 11”, scored at 5 ½”, and the base layer is Soft Sky Foil Frenzy Specialty DSP, cut at 4” x 5 ¼”.

From the Myths & Magic 6” x 6” Glimmer Paper, cut at piece of the turquoise paper 2” x 5 ¼” and punch the end out with the Banner Triple Punch.

On a piece of Whisper White cardstock, stamp the “best” in Basic Gray Archival ink, color the leaves with Pear Pizzazz Stampin’ Write Marker and color the flowers with a Blender Pen and Tempting Turquoise and Soft Sky inks. The “wishes” sentiment is stamped in Tempting Turquoise ink. This is then cut out with the 3rd largest Lots of Labels Thinlits and I used some Snail on the back to adhere some Silver Metallic Thread.

To put this card together, I adhered the glimmer paper with Fast Fuse to the Foil DSP layer, adhered that to the card base, and adhered the sentiment in the middle with Stampin’ Dimensionals.

fullsizeoutput_1650fullsizeoutput_164d

With so many sentiments from this set, the greetings are endless! What I love about these cards is how quick and simple they were to create and the added sparkle of glitter and foil papers!

Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed this card and thanks for stopping by!



Product List

Unicorns, Glitter, and Rainbows

Hello and welcome to my final card this week featuring the Myths & Magic Suite from the 2018 Occasions Catalog! Ok, I will admit that not everything is from the suite on this card, but I just couldn’t help myself! I just had to make this super WOW card with the Sunshine & Rainbows Bundle because who doesn’t need some Unicorns, Glitter, and Rainbows?? This card is really easy to make, the hardest part was figuring out how I wanted the clouds on the lower part of the card and how to position the unicorns and the rainbow with dimensionals so they really stand out.

The card base is in Thick Whisper White cardstock, cut at 5 ½” x 8 ½”, scored at 4 ¼”, and the base layer is from the Myths & Magic Specialty DSP, cut at 4” x 5 ¼”.

The clouds are from the Rainbow Builder Dies, using Glossy White cardstock and the Myths & Magic 6 x 6 Glimmer Paper in iridescent.

fullsizeoutput_15a0

The rainbow is cut out using the Rainbow Builder Framelits in Real Red, Pumpkin Pie, Daffodil Delight, Old Olive, Night of Navy, and Elegant Eggplant cardstock.

The unicorns are stamped in Memento Ink, with one colored the same as the rainbow and the other colored in with Flirty Flamingo, Peekaboo Peach, So Saffron, Pear Pizzazz, Pool Party, and Sweet Sugarplum Stampin’ Write Markers. Both are cut out with the coordinating die from the Magical Mates Framelits.

fullsizeoutput_15a3

The sun is stamped in Crushed Curry Ink and then cut out with the coordinating die from the Sunshine & Rainbows Bundle. The sentiment is heat embossed in White Embossing Powder and then cut out with the smallest circle Stitched Shapes Framelits.

To put this all together, the clouds, rainbow, and unicorns are all adhered with Stampin’ Dimensionals and everything else is with adhesive.

Isn’t this a fun card to send to someone just because?

Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed this card and thanks for stopping by!

Product List