6 x 6 DSP-Are you warming up to it yet?

Hello and welcome to today’s card, which is another fun Christmas card made with the Wrapped in Plaid DSP! On Monday, I shared with you some of my thoughts and tips regarding 6” x 6” and how to get the most out it for your cards. Today’s card will show you how I used one design of DSP to make one card, which if you use all four sheets you will make four cards, and only have a small scrap of DSP to discard, or keep, that is up to you!

In last year’s Holiday Catalog, the Dashing Deer stamp set and coordinating Detailed Deer Dies were a huge hit with crafters, so I thought I would show you how to make a fun and simple card with this stamp set and DSP from this year’s Holiday Catalog. This design coordinates perfectly (to me at least) with the stamp set and dies, but you could really use this set for any of the designs from the DSP. My first cut of this DSP is along the bottom at ¾”, this is to make sure that the deer design is going the right way as this will be adhered to the inside of the card. Turn the DSP 90 degrees and cut at 4”. This will give you one piece at ¾” x 6”, one piece at 4” x 5 ¼” (the base layer), and one piece at 2” x 5 ¼” (layered on top of the base layer):

For the card front you will need:

1. Use the deer die to cut a piece out of Cherry Cobbler cardstock.

2. Tie a piece of the Gold Shimmer Ribbon into a small bow.

3. Use the smallest Stitched Rectangles layering die to cut out a piece in Shaded Spruce cardstock and stamp the sentiment in Golden Glitz ink. I used my Stamparatus to stamp the sentiment, I found that you have to stamp an image more than once to get a nice image and use your heat tool to dry the ink completely.

To assemble the front:

1.Adhere the smaller strip of DSP to the middle of the base layer DSP.

2. Adhere the deer to the middle strip of DSP and use glue dots to adhere the ribbon to the lower portion of the deer’s neck.

3. Adhere the sentiment with dimensionals.

This completed base layer is adhered to a Thick Whisper White cardstock, cut at 4 ¼” x 11”, and scored at 5 ½”. I added three of the 4mm Gold Glitter Enamel Dots to the deer antlers:

For the inside, I again used my Stamparatus to stamp the inside sentiments, in case I needed to stamp the accent stamp again in the gold and stamp the sentiment more than once in Cherry Cobbler ink so you can see it thru the gold ink. The ¾” x 6” piece of DSP is adhered along the bottom of the cardstock, trimming off the excess:

Isn’t this a fun and quick Christmas card to make? If you did not want to use the 2” strip of DSP as another layer, you can easily combine it with another 2” strip design and use a piece of ribbon to cover the middle where the two pieces meet, giving you another four cards! Even though these cuts for the DSP are simple, you can easily dress up the card with die cuts and embellishments, there’s no limit to the possibilities!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Don’t put away those Christmas crafting supplies yet!

Hello and welcome to today’s project, which is a scrapbook page layout for Christmas! I don’t know about you, but I really haven’t “put away” any of my Christmas crafting goodies, so I thought what better way to use up left-over designer series paper than make a scrapbook page! If you like to scrapbook or even would like to start scrapbooking, it can be very overwhelming not just to keep up with, but where to start?! For Christmas 2016 I decided to make a scrapbook of the year for my parents, my in-laws, and my son and daughter in-law because we had an eventful and exciting year (my older son and DIL were married, my younger son graduated from boot camp, my older son was promoted in the service, first deployment homecoming, family vacation, and a birth announcement!). While it may have seemed easy because I just went chronologically through the year, making 4 (yes, FOUR) scrapbooks starting right after Thanksgiving was a lot! So needless to say, mine did not get made, but the other 3 did and I took pictures of each page for when I get around to making mine….

With the New Year upon us, I did make some “crafting resolutions” and one of those is to use up all the old designer series paper I have on hand, whether it’s card making, some sort of craft, or scrapbooking. With the end of the 2018 Holiday Catalog just days away, I thought that creating a quick and fun scrapbook page would be a great way to end the year and start on my resolution!

To start, I used the tree stamp from Winter Woods and stamped it twice in Garden Green ink on a piece of Whisper White cardstock. I then cut out one image with the coordinating framelit from In the Woods and then cut out the other tree with the smaller framelit that gives it a 3D effect. I then used some of the Shimmery White Embossing Paste on the cut outs and set aside to dry:

fullsizeoutput_3034fullsizeoutput_3037

For this page, I decided to use one 4”x 6” photo and two 2”x 3” photos, so for the 4” x 6” I cut a piece of Garden Green cardstock at 4 ½” x 6 ½” and used this edgelit die from Swirly Snowflakes Thinlits Dies on the sides. Then I cut two pieces of the DSP at 2 ½” x 3 ½”, just flipping over one of the DSP:

fullsizeoutput_303afullsizeoutput_303d

The rest of the items I used is the sentiment from Snowflake Sentiments stamped in Cherry Cobbler ink on Whisper White cardstock, punched out with the Starburst Punch, punched out another in Garden Green cardstock, used both snowflake framelits to cut out 2 small and 3 large from the Sparkle Glimmer Paper, both layers of the tree are adhered with mini dimensionals, the deer’s are stamped in Crumb Cake ink on Whisper White cardstock and cut out with the coordinating framelits from the Dashing Deer Bundle, and used the hill framelit from In the Woods on a piece of 1 ½” x 4” piece of White Velvet paper:

fullsizeoutput_3040

I chose this design from the DSP and figured out the best placement for the pictures:

fullsizeoutput_3044

Then I took the accessory pieces and placed them where I thought they looked best. The snowflakes are adhered using the Fine Tip Glue Pen, the deer in the upper right corner is adhered with dimensionals, the sentiment is adhered to the cardstock (slightly off) and then adhered with dimensionals, the hill is adhered to the DSP with the small deer adhered to the velvet paper, and then the layered tree is adhered with dimensionals:

fullsizeoutput_3047

Wasn’t that pretty quick and easy? Even though I don’t have pictures ready, I’m going to store this in the time being in one of my 12” x 12” Page Protectors (page 194 in the AC). Another alternative to the picture size is two 4” x 6” or four 2” x 3” pictures. I just love the sentiment for this scrapbook page, it sums up the season!

From my family to yours, have a safe, happy, and prosperous 2019! Happy New Year!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors


Product List

Happiest Christmas Wishes

Hello and welcome to today’s card, which is a beautiful Christmas card featuring the Dashing Along Designer Series Paper, In the Woods Thinlits Dies, and Dashing Deer Thinlits Dies! If you haven’t notices, but the Holiday Catalog is a huge hit and the Designer Series Paper is going fast! Luckily, Stampin’ Up! brought back the Dashing Along DSP (this was originally only available in September with a qualifying order), which instead of having the normal 12 sheets with 2 each of 6 double-sided designs, you get 12 sheets with 4 each of 3 double-sided designs! Having 4 sheets of the double-sided design means you can stretch out that paper for card making! For today’s card I am using one sheet of the double-sided design, so let’s get started!

The card base is Cherry Cobbler cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_2e60

The base layer of DSP is cut at 4” x 5 ¼”:

fullsizeoutput_2e63

The next layer of DSP (which is the other side design of the base layer) is but at 3” x 4 ¼”:

fullsizeoutput_2e66

For the front of the card, you will need one each of the smaller deer thinlits from Detailed Deer cut out of Silver Foil Sheet, six each of the outline flower thinlit from Detailed Deer cut out of Silver Glimmer Paper, and one piece of Whisper White cardstock cut at 1 ¼” x 4 ¼” and use the hill thinlit from in the Woods:

fullsizeoutput_2e69

To create the hills, adhere one of the pieces to the DSP and then flip the other over and use dimensionals to adhere over the other layer. The deer on the left is adhered with to the top layer (apply adhesive to the lower half) and then adhere the deer on the right with Mini Dimensionals:

fullsizeoutput_2e6c

The base layer is adhered to the card base and then the scenery is adhered on top of the base layer. The six flowers are actually going to be snowflakes, the three on the scenery are adhered with Glue Dots and the three on the base layer are adhered with Mini Dimensionals:

fullsizeoutput_2e6f

The inside sentiment is from the Dashing Deer stamp set in Garden Green and Cherry Cobbler inks, on a piece of 4” x 5 ¼” Whisper White cardstock. I used my Stamparatus to position the top floral stamp, which I used my Stampin’ Write Markers to color, and then turned the cardstock so the bottom was now the top, colored the stamp again, and then stamped the image. The sentiment is positioned below the floral stamp design:

fullsizeoutput_2e72

This card is really easy to make multiples of when you use your Stamparatus for the inside sentiment, you can use two sheets of the DSP (and still have two more of the design left!), and there are three of the flower thinlits that are used to create snowflakes! With the busy holiday season, having a great card that you can make multiples of in a snap is a time saver!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors


Product List

To You & Yours-Paper Pumpkin Alternative

Hello and welcome to today’s cards, which are two alternative ideas for the November 2018 Paper Pumpkin, To You & Yours. I will first admit that I suspend my subscription from time to time, it just depends on if I feel I have enough time to spend playing and creating. I totally forgot to suspend November’s, I really didn’t think I was going to have the time; however, I am so glad I did forget! This month’s kit makes 10 super cute cards, but we all know we love to see the alternatives! These first two alternatives came to mind right away, so let’s get started!

For the card on the left, you will need the Cherry Cobbler and gold plaid base and one of the self-adhesive circles from the kit. Additionally, I heat embossed this deer from the Dashing Deer stamp set in Gold Emboss Powder, cut out the flourishing corner dies in Gold Foil, and used my Dark Cherry Cobbler Stampin’ Blends on one of the 4mm Clear Rhinestone Jewels:

fullsizeoutput_2db0

To assemble, place the self-adhesive circle die cut in the middle, adhere the embossed deer on top, adhere the gold flourish pieces in opposite corners, and then adhere the colored rhinestone on the deer’s nose:

fullsizeoutput_2db3

This is then adhered to the card base from the kit with dimensionals and the inside sentiment stamps from the kit are in Cherry Cobbler and Garden Green inks:

fullsizeoutput_2db6fullsizeoutput_2db9

For the card on the right, start with Cherry Cobbler cardstock, cut at 5 ½” x 8 ½”, and score at 4 ¼”:

fullsizeoutput_2dbc

The base layer is Very Vanilla cardstock, cut at 4” x 5 ¼”, and embossed with the Cable Knit Dynamic TIEF:

fullsizeoutput_2dbf

I cut the Very Vanilla and Cherry Cobbler plaid base layer from the kit in half, 2 5/8” x 4”, and then used four of the leaves and the adhesive back sequins. The sentiment is stamped in Cherry Cobbler ink on Very Vanilla cardstock, punched out using the Everyday Label punch, and then punched out another in Gold Foil, cutting it in half to layer behind the sentiment:

fullsizeoutput_2dc5

The gold foil is adhered behind the sentiment, adhere two of the leaves on each end, and then adhere to the plaid base with dimensionals:

fullsizeoutput_2dc8

The embossed base layer is adhered to the card base, I used dimensionals to adhere the plaid layer on top, and added some of the gold sequins for accents:

fullsizeoutput_2dcb

The inside sentiment is on a piece of 4” x 5 ¼” Very Vanilla cardstock, stamped in Cherry Cobbler ink, the leaves are stamped in Garden Green ink, and the stars are stamped in Daffodil Delight ink:

fullsizeoutput_2dce

Aren’t these fun and easy alternatives for the November 2018 Paper Pumpkin?? For the second card, you can easily make two of these at the same time! I can’t wait to create more alternatives with this kit!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors


Product List

11.18_PP_KITCONTENTS