Q-tip coloring with Flowering Foils Specialty Designer Series Paper!

Hello and welcome to today’s card, which features Q-tip coloring with the Flowering Foils Designer Series Paper! Have you ever colored using a Q-tip? This is a fun and easy way to color using your ink pads and the end of a Q-tip! The Flowering Foils DSP is nice and smooth, so applying the ink is very easy and dries quickly. Since there are a few smaller, detailed pieces on this DSP, I thought using a Q-tip would be a great way to color it in and if you are just starting your crafting journey and don’t have a lot of supplies or are limited on space, this would be a fun technique to show you!

The base layer is this design from the DSP, cut at 4” x 5 ¼”. I first colored in all the leaves with Pear Pizzazz ink, the flower centers with Pineapple Punch ink, and Flirty Flamingo ink on different flower petals:

I then colored in the flowers with Petal Pink in and the flower buds with Grapefruit Grove ink:

I went back over the flower centers with Pineapple Punch ink and blended the Petal Pink ink on the petals a little more. I then filled in the background with a Light Balmy Blue Stampin’ Blends to really make the colors pop:

For the rest of the card front, you will need:

1. 6 ½” piece of Petal Pink Organdy Ribbon.

2. Enough Braided Linen Trim to tie into a bow.

3. One of the 5mm (large) Champagne Rhinestone Basic Jewels.

4. Stamp the sentiment on Whisper White cardstock in Gray Granite ink and punch out with the Tailored Tag Punch. Punch another piece out of Silver Foil Sheet and cut in half, this will be layered under the sentiment.

Use liquid glue to adhere the foil punch piece under the sentiment, this will give you time to move the piece before it sets and dries. Fold the organdy ribbon in half and use a glue dot to keep it in place. Tie the linen trim into a bow, use a glue dot to adhere to the organdy ribbon, and place the Champagne Rhinestone on the middle of the bow:

Use another glue dot to adhere the organdy ribbon to the base layer and dimensionals to adhere the sentiment:

This completed piece is adhered to a Gray Granite cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

I kept the inside very simple, stamped the sentiment in Gray Granite ink on a piece of Whisper White cardstock, cut at 4” x 5 ¼”:

Don’t you just love this Flowering Foils Designer Series Paper? You can earn it for free, now thru March 31st (or while supplies last), with a qualifying order during Sale-A-Bration! While this DSP is beautiful on its own, coloring it just takes it a step up for your cards and crafts! Now, I know I should have also colored in the background of this DSP using a Q-tip, but I really wanted to see how well Stampin’ Blends colored with this paper and to really “saturate” the background with color so the flowers stand out. 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Glitzy Birthday Card!

Hello and welcome to today’s card, which is a quick and fun birthday card with lots of glitz! In this year’s Holiday Catalog, Stampin’ Up! introduced metallic ink pads, Golden Glitz, Silvery Shimmer, and Celestial Copper, and I was ecstatic!  This now means that you don’t have to heat emboss gold, copper, or silver to your projects! Don’t get me wrong, I love heat embossing, but let’s face it, it can be, well, messy….if you’ve ever dumped a container out on your desk or floor, you know what I mean! Who wouldn’t love to receive a birthday card that’s gold and glitzy??

You will start with a base layer of Rococo Rose cardstock, cut at 4” x 5 ¼”, embossed with the Tin Tile 3D Folder, and I lightly “dragged” the Golden Glitz Metallic ink across the raised side of the embossed cardstock. TIP-save time by using your heat tool to dry the ink:

For the card front:

1. On Crushed Curry cardstock, stamp the medium daisy stamp with Golden Glitz Metallic in three times and punch out with the coordinating punch.

2. Stamp the sentiment from Itty Bitty Birthdays on Very Vanilla cardstock in Rococo Rose ink and cut out with the third smallest Stitched Nested Labels die.

3. Use the fourth smallest Stitched Nested Labels die to cut out a layer piece for the sentiment from Early Espresso cardstock:

Adhere the stitched labels layers together and adhere to the card front. Use your bone folder to curl the edges of the daisy pieces, use liquid glue to adhere the layers together, slightly staggering, use three of the smallest Gold Glitter Enamel Dots for the center, and use a dimensional to adhere to the base layer, next to the sentiment piece:

This completed piece is adhered to a Early Espresso cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside sentiment, cut a 4” x 5 ¼” piece of Very Vanilla cardstock, the sentiment is stamped in Rococo Rose ink and the daffodils are stamped along the bottom in Golden Glitz Metallic ink:

Isn’t this a fun and glitzy card?? I really love how the gold metallic ink coordinates with these colors! If you are into heat embossing, then I highly suggest these metallic ink pads, just don’t forget that they take a little bit to dry, but this can be sped along with your heat tool!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors

Product List

Paper Trimmer

 

 

Snail Adhesive

 

 

It’s your day with Daisy Lane!

Hello and welcome to today’s card, that is a fun birthday card made with the Daisy Lane and Itty Bitty Birthdays stamp set! When I set out to create this card, I already had an idea about what I wanted to do with the daisy and leaves, then thought combining the All Wired Up background stamp and the Corrugated Embossing Folder would be perfect! I also decided to go with more fall-like colors since Fall is right around the corner!

The base layer is Very Vanilla cardstock, cut at 4” x 5 ¼”, stamped with All Wired Up in Early Espresso ink, and I used my Stamparatus to help getting that completed look as in the past I’ve missed a spot or two. The next layer is Calypso Coral cardstock, cut at 3” x 4”, and embossed with the Corrugated Embossing Folder:

Additionally, you will need Very Vanilla cardstock to stamp the large daisy in Calypso Coral ink two times, punch those out and two more that are blank, stamp the leaves four times in Old Olive ink and fussy cut out, stamp the sentiment in Calypso Coral ink and punch out with the 1 1/8” Scallop Punch, layer Gold Foil under the sentiment with the 1 3/8” Scallop Punch, and then one of the Perennial Essence Centers for the daisy:

To assemble:

1. Adhere two of the leaves together at the top and two at the bottom to create the base for the daisy.

2. Adhere all four daisy pieces together with liquid glue, the two stamped daisies on top and the two blank pieces on the bottom, and then the floral center. Adhere the daisy on top of the leaves.

3. Adhere the corrugated cardstock to the base layer.

4. Adhere the daisy piece with liquid glue to the corrugated cardstock and then adhere the sentiment with a dimensional.

This completed piece is adhere to an Early Espresso cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

The inside is Very Vanilla cardstock, cut at 4” x 5 ¼”, the sentiment is stamped in Early Espresso ink, the stem is stamped in Old Olive ink, and the daisy is stamped in Daffodil Delight ink with Calypso Coral sponged on around the edges with Calypso Coral ink:

Don’t you just love the All Wired Up background stamp?? This can give your card a totally different look! I really like how the strip of corrugated cardstock accents this card so nicely!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Sweet and simple card with the Daisy Lane Bundle

Hello and welcome to today’s card, which is a sweet and simple card made with the Daisy Lane Bundle! I’ve been having fun creating cards with the larger daisy stamp and the daisy punch, but now that I have the medium daisy punch, it is time to make some more daisies!! When I first started, I really wanted to use a piece of the 2019-2021 In Color 6” x 6” DSP in Pretty Peacock, so I chose to use Pineapple Punch for the daisies to really make them pop! 

You will start with this design in Pretty Peacock from the 6” x 6” DSP, I cut 2” off one end for one piece 2” x 6” and one piece 4” x 6”, and then trimmed ¾” off the 4” x 6” piece. This will give you three pieces: 2” x 6”, 4” x 5 ¼”, and ¾” x 4”, in which the 4” x 5 ¼” will be your base layer for this card:

For the daisies, I stamped the medium daisy six times in Pineapple Punch ink on Whisper White cardstock and punched out with the medium daisy punch:

You will layer three daisies together with liquid glue, which helps you move and position the daisy layer. The first two daisies are slightly off and then the third daisy fills in:

Additionally for the card front, on Whisper White cardstock stamp the stems in Granny Apple Green ink and cut out with the third largest Stitched Nested Labels, use the Detailed Ribbon Border Punch on two pieces of Silver Foil that are 4” long, and then trim the DSP to 2” x 4”:

I used some snail on the back of the DSP to adhere the silver punched pieces along the edge:

That piece is adhered to the DSP base layer and then the cardstock with the stamped stems is adhered with dimensionals:

I used my bone folder to “curl” the ends of the petals, liquid glue to adhere the daisies to the stems, and then placed a medium Clear Faceted Gem in the middle of each. This completed piece is then adhered to a Pretty Peacock cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

The inside is Whisper White cardstock, cut at 4” x 5 ¼”, and the remaining ¾” x 4” strip of DSP is adhered along the bottom:

Fun and easy to make, right?? Did you notice that I used almost a whole sheet of 6” x 6” DSP to make this card? I thought both sides complement each other and just need a little border! This left me with one piece that is 2” x 2”, which can easily be used to layer on another card! I intentionally left any sentiments off of this card, this is a great card to have on hand for any occasion.

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Delightful Day and Daisy Lane card

Hello and welcome to today’s card, which is a fun birthday card featuring the Delightful Day and Daisy Lane stamp set! I just love the Mosaic Mood DSP and when I decided I wanted to create a card with this design from the it, so I set out to try and find a new color combo! Would you have ever thought to combine Crushed Curry, Melon Mambo, and Basic Gray? Me neither!!

The base layer is this design from the DSP, cut at 4” x 5 ¼”:

For the card front, you will stamp the big daisy stamp from Daisy Lane four times in Versamark ink, heat emboss with Clear Emboss Powder, and punch out with the Daisy Punch, cut a 5 ¼” piece of Whisper White Flax Ribbon, two of the Perennial Essence Floral Centers, stamp the sentiment from Delightful Day in Melon Mambo ink on Whisper White cardstock, punch out the sentiment with the Tailored Tag Punch, and then punch out another piece in Basic Gray cardstock to layer under the sentiment:

I used liquid glue to adhere the daisy layers together, adhered the flower center, and then adhered the layering cardstock behind the sentiment, slightly to the left:

The base layer is adhered to a Basic Gray card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”, and the flax ribbon is adhered across the middle with Tear & Tape:

I used my bone folder to the flower petals to curl them a little before adhering them to the base layer and then adhered the sentiment:

After I assembled the card front, I thought it needed some embellishment, so I used one of the big and two of the small Clear Epoxy Droplets:

The inside sentiment is on a 4” x 5 ¼” piece of Whisper White cardstock and I used sponge daubers to ink the daisy and sentiment in Crushed Curry and Melon Mambo inks:

What a fun and cheery card to make! Did you know that the Delightful Day stamp set has a coordinating punch that you can purchase as a bundle? You can make coordinating tags in three different sizes with the Delightful Tag Topper, how fun is that??

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Smile when it’s your time to shine!

Hello and welcome to today’s card, which is a great card combining the Daisy Lane stamp set and Garden Lane Designer Series Paper! This DSP is perfect when you want a simple card with little stamping. I chose to use Mossy Meadow as my card base because I felt it really made the other colors in the DSP “pop” and I was able to create color coordinating ribbon with Stampin’ Blends.

The base layer is this design from the Garden Lane DSP, cut at 4” x 5 ¼”:

You will also need for the card front a Pearlized Doily, the sentiment heat embossed in silver on Whisper White cardstock and cut out with the smallest Rectangle Stitched Framelits, Soft Sea Foam cardstock cut out with the largest Layering Square Framelits and then embossed with the Tufted DTIEF, and enough Silver Metallic Edge Ribbon to tie into a bow, colored with the Dark Mossy Meadow Stampin’ Blend Pen:

I used my Fine Tip Glue Pen to adhere the doily to the embossed square, turned it 90 degrees to adhere the sentiment to the middle, and then adhered this to the DSP base layer with dimensionals:

I then tied the ribbon into a bow around the bottom of the DSP and then adhered to the Mossy Meadow cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½” (it is easier for me to color a couple pieces of ribbon, tie one into a bow, adhere the other piece around the front of the DSP, and then adhere the bow with a glue dot):

The inside sentiment is on a 4” x 5 ¼” piece of Whisper White cardstock in Mossy Meadow ink, the flowers are first stamped in Soft Sea Foam ink and then I used a Sponge Dauber with Mossy Meadow ink to color the middle, and I adhered a ½” x 4” piece of the same DSP design as the front along the bottom:

Wasn’t this a fun and easy card to make? To me, this DSP is perfect for using sentiment stamps alone with it and pairs easily with Whisper White and just about any of the Neutrals for your card base layer. This is such a simple and easy card layout that you could use with any designer series paper.

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

A Daisy Lane friend card

Hello and welcome to today’s card, which feature’s the Daisy Lane stamp set, found on page 23, from the 2019-2020 Annual Catalog! I also embossed the So Saffron Vellum cardstock, from the Perennial Essence Vellum Cardstock, with the Basket Weave 3D Embossing Folder! This is another fun way to use the vellum cardstock on your cards and projects! One little tip that I can pass along about this new cardstock is that one side of the cardstock is smoother and slightly lighter and the other side has a slight “rough” texture and slightly darker. When you have this beautiful vellum cardstock in your hands, you will see what I’m talking about! 

To start, cut a piece of the vellum cardstock at 4” x 5 ¼” and emboss the darker/rough side with the Basket Weave 3D EF, which will be your base layer:

You will also need the large daisy stamp to stamp once on So Saffron cardstock with So Saffron ink and once on Petal Pink cardstock with Petal Pink ink, punching out with the coordinating Daisy Punch. The flower stem is stamped in Old Olive ink on Whisper White cardstock, “fussy cut” out, the sentiment is stamped on Whisper White cardstock in Old Olive ink and the flowers are sponged with daubers, So Saffron ink in the center and Petal Pink ink on the petals, cutting out with the die from Stitched Labels Dies, one of the Perennial Essence Floral Centers, and enough Gold Metallic Edge Ribbon to tie into a bow, which I colored with the Light Old Olive Stampin’ Blends:

The daisy petals are layered (offset) on top of each other, the Petal Pink is underneath, the floral center is placed in the flower center, then this is adhered to the flower stem. The sentiment piece is adhered to the vellum cardstock, the flower is adhered on top and to the side of the sentiment piece, and then the ribbon bow is adhered with glue dots:

I used liquid glue behind the flower and sentiment piece on the back side of the vellum cardstock to adhere to the Petal Pink cardstock card base, which is cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

The inside sentiment is on a piece of 4” x 5 ¼” Whisper White cardstock, stamped in Old Olive ink, and the flowers are stamped the same way I did for the front, with sponge daubers, So Saffron, and Petal Pink inks:

Isn’t this a great card that your friend would love?? This sentiment could be for a birthday or any other celebratory reason!! I just love this stamp set and cannot wait to get the coordinating Medium Daisy Punch to create more layers and colors for pretty flowers!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List