Aloha card from that Tropical Oasis Suite!

Hello and welcome to today’s card, which is a beautiful, any occasion card featuring the Tropical Oasis Suite! What better way to let someone know you are thinking of them than sending a bright and cheerful card? Since I haven’t really used Pigment Sprinkles, I thought the hibiscus flowers from the Timeless Tropical stamp set would be perfect! Since the colors of Hawaiian Hibiscus flowers are so beautiful and so vibrant, I chose to use Mango Melody and Daffodil Delight for the flowers and Granny Apple Green for the leaves to make these flowers “pop”.

To start, use this design from the Tropical Oasis DSP, cut at 4” x 5 ¼”, and embossed with the Coastal Weave 3D EF:

For the card front, you will need:

1. On Fluid 100 Watercolor Paper, stamp the large hibiscus flower and leaf twice using Stazon ink. Sprinkle Daffodil Delight and Mango Melody Pigment over the flowers, lightly spritz with water using your Stampin’ Spritzer, and do the same thing with Granny Apple Green Pigment over the leaves. There’s no real “right or wrong” way to do this, it all depends on how light or dark you want the pigment sprinkle color to be. I also keep a paper towel nearby to soak up any excess liquid. Once you have achieved your desired look, you can use your heat tool to dry the paper quickly.

2. Use the coordinating dies to cut the flowers and leaves from the watercolor paper.

3. The aloha die is used to cut out of Mango Melody cardstock.

4. Use one of the pineapple trinkets from the Tropical Oasis Trinkets.

5. Cut two 4” pieces of the Braided Burlap Trim, cutting the ends at an angle.

This is a 3″ x 5″ piece of watercolor paper.

To assemble the card front, adhere the two large flowers layered and the leaves under the flowers to the DSP base layer. Use liquid glue to adhere the two pieces of trim to the DSP base layer, the die-cut cardstock, and the pineapple trinket on top of the trim pieces:

This is then adhered to an Old Olive cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Very Vanilla cardstock at 4” x 5 ¼”, adhere a ¾” piece of coordinating cardstock along the bottom, and I used the three small flowers die on the leftover watercolor paper to cut out and adhere to the DSP:

Don’t you just love this suite?? I chose to leave the inside of the card blank for use on any occasion. If you are looking for color inspiration, Google-Hibiscus Hawaiian and you will not be disappointed! You can easily replicate this card using one sheet of the DSP and the flower colors could be different with each card.

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Timeless Tropical birthday card!

Hello and welcome to today’s card, which features the Tropical Oasis Suite from the 2020 Mini Catalog! I was fortunate to win the Timeless Tropical stamp set when I attended OnStage in Portland this past November, but I fell in love with this suite when I first saw it in the catalog! The timing couldn’t be better for the release of this suite after spending a few days with my mother and younger son in Hawaii, I right away knew that the perfect Christmas present for my mother would be a small scrapbook! Since she vacationed with us in the Outer Banks in June, the Come Sail Away Suite was perfect for those pictures, and the Tropical Oasis Suite was perfect for the pictures taken in Hawaii! Since the scrapbook was an 8” x 8”, that left me with several perfect pieces of DSP for card making and to get started on those January birthdays!

For this card, I used this design from the DSP, cut at 4” x 5 ¼”, for the base layer:

Additionally, you will need the following for the card front:

1. 2” x 4” piece of Crumb Cake cardstock, embossed with the Coastal Weave 3D Embossing Folder.

2. A 4” strip of the Braided Burlap Trim, use your fingertips/nails to fray the ends.

3. A ¾” x 4” strip of DSP, this is the back design from the one used for the base layer.

4, Stamp the sentiment in Poppy Parade ink on Whisper White cardstock and cut out with the second smallest layering Stitched Rectangle Dies.

5. One leaf trinket.

6. Use the flower die to cut out one set in Poppy Parade cardstock and another in Petal Pink cardstock. Keep the smallest and largest flowers in each color for the front and the two middle flowers will be used for the inside. You will also need Rhinestone Basic Jewels for the centers.

Adhere the embossed Crumb Cake cardstock to the base layer DSP, slightly down from the top and away from the edge for a dimensional to fit in-between. Adhere the strip of DSP to the base layer with dimensionals (on each end):

Use glue dots to adhere the flowers to the sentiment piece and then use a 4mm rhinestone in the middle of the large flower and a 3mm rhinestone in the middle of the small flower (the rhinestone hides the glue dots). Adhere the sentiment over the embossed cardstock with a dimensional on each side:

Use liquid glue to adhere the burlap trim to the strip of DSP and to adhere the trinket to the burlap trim. This completed piece is adhered to a Thick Whisper White cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Poppy Parade cardstock at 4” x 5 ¼” and a piece of Whisper White cardstock at 3 ¾” x 5”. Stamp the sentiment in Poppy Parade ink and then adhere the two remaining flowers with glue dots (the leaves are big enough to hide the glue dot under):

Isn’t this a super cute card?? Now, Poppy Parade and Petal Pink are NOT listed as coordinating colors for this DSP, but after comparing cardstocks, I thought these coordinated with the DSP better. The strip of DSP is actually that 1 ½” strip that you have when you cut a 12” x 12” sheet down at 4”, I just cut this in half and made two of these cards! Any products from the 2020 Mini Catalog will be available for customers to purchase on January 3rd!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

It's a Birthday Bonanza!

Hello and welcome to today’s card, which features the Birthday Bonanza Designer Series Paper to make this super cute birthday card! This designer series paper is part of the Birthday Bonanza Suite from the 2020 Mini Catalog! Who wouldn’t want a super cute, bright, and cheerful card for their birthday?? As an added bonus, I also used the Coastal Weave 3D Embossing Folder and the Hammered Metal 3D Embossing Folder (this is carrying over from the Holiday Catalog) to give the balloons some texture and was also able to incorporate the Metallic Baker’s Twine & Sequin Combo Pack from the Sale-A-Bration Catalog! 

The base layer for this card is this design from the Birthday Bonanza DSP, cut at 4” x 5 ¼”:

For the rest of the card front, you will need:

1. Use the Balloon Bouquet Punch to punch out of coordinating cardstock and emboss with the Coastal Weave and Hammered Metal 3D EF. I used Terracotta Tile, Grapefruit Grove, Daffodil Delight, and Coastal Cabana cardstock. 

2. Use the Metallic Baker’s Twine to tie to the end of the balloons.

3. Use whatever color/size combo of sequins.

4. Stamp the sentiment in Bermuda Bay ink on Whisper White cardstock and cut out with the smallest layering Stitched Rectangles Die.

I first adhered three of the balloons with glue dots to the DSP:

Then adhere the other two balloons and sentiment with dimensionals, making sure the baker’s twine is behind the sentiment and trimming off the excess baker’s twine:

I used glue dots to adhere the bigger sequins and the fine tip glue pen to adhere the small sequin on the corner of the sentiment. This is adhered to a Bermuda Bay cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Bermuda Bay ink, and adhere a ¾” strip of DSP along the bottom:

Isn’t this a super cute card?? If you missed this suite or maybe thought it wasn’t for you, give it a second look! If you are looking for some cute birthday DSP, pairing it with items you may already have is a fun way to change up your cards! The Metallic Baker’s Twine & Sequins Combo coordinate with the Lily Impressions DSP, but as you can see, you just might find another DSP to coordinate it with-just like I did with the Birthday Bonanza DSP! All items from the 2020 Mini and Sale-A-Bration Catalogs will be available for customers starting January 3rd!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List