My Meadow Thank You Card

Hello and welcome to today’s card, which features the My Meadow stamp set from the 2020 Mini Catalog! If you are a fan of the Waterfront and Snowfront stamp sets, then you are going to love the new My Meadow stamp set! What I like in particular with all these stamp sets, is that you can “build a scenery” that can be as simple or as detailed as you like, simply with ink, stamps, and paper! If you’ve been contemplating this stamp set and may feel a little “overwhelmed” as how you would stamp with this set, I thought today’s card would be a great example to share. I kept it very simple, with just a few colors, and can really be used for any occasion.

To start, I first cut a piece of Whisper White cardstock at 3 ¼” x 4 ½”:

Using Seaside Spray ink, I first stamped the stream with the smallest end at the top, turned it 180 degrees, and then stamped again with the smallest end at the bottom. To fill in the grass or meadow, I used Call Me Clover ink with the biggest fill-in stamp on the right side and the medium fill-in stamp on the left side:

The bridge and birds are stamped in Crumb Cake ink and the clouds are stamped in Seaside Spray ink:

I filled in the open area on the left side by stamping the single tree with Crumb Cake ink and the leaves and grass with Call Me Clover ink:

The base layer is this design in Seaside Spray from the 2019-2021 6” x 6” DSP, first cut a ¾” strip off one side, turn 90 degrees, and cut at 4”. This will give you three pieces at 4” x 5 ¼”, ¾” x 6”, and 2” x 5 ¼”:

I decided to make this a “thank you” card using sentiments from Peaceful Moments stamp set. The sentiment is stamped in Blueberry Bushel ink on Whisper White cardstock and cut out with the smallest layering Stitched Rectangle Die:

The card base is Blueberry Bushel cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”. The DSP base layer is first adhered to the card base, the stamped scenery is adhered on top of the DSP at an angle, and the sentiment is adhered with dimensionals:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Blueberry Bushel ink, and adhere the ¾” strip of DSP along the bottom, trimming off the excess:

This really was an easy card to make! I really wasn’t sure how I was going to stamp this, I just knew that I wanted to make it look like a stream with the bridge going over it. So basically, I started in the middle (or the stream) and worked my way out. Since these are photopolymer stamps, that enabled me to figure out which “fill-in” stamps I could use along the stream. So to sum it up, start simple and with three colors to stamp with at first and then as you become more comfortable with your “building”, add another color or two!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Timeless Tulips Get Well Card

Hello and welcome to today’s card, which features the Timeless Tulips Bundle! This distinktive stamp set not only has some great sentiments for different occasions, but also has a coordinating punch! This is a great way for you to build up your tulips without a lot of work! I chose to make this card a “get well card” because who wouldn’t love to get a beautiful card when you’re not feeling all that great! For the bouquet, I did some “fussy cutting”, which is pretty easy with this stamp set.

The base layer is this design from the 2019-2021 In Color 6” x 6” DSP in Terracotta Tile, cut at 4” x 5 ¼”:

For the card front, you will need:

1. Stamp the large tulip stamp in Calypso Coral ink on Whisper White cardstock two times and punch out with the coordinating punch.

2. Stamp the medium tulip in Terracotta Tile ink on Whisper White cardstock two times and fussy cut out.

3. Stamp the small tulip in Grapefruit Grove ink on Whisper White cardstock two times and fussy cut out.

4. Use enough Whisper White Polka Dot Tulle Ribbon to tie into a bow.

5. Stamp both stem stamps in Old Olive ink on Whisper White cardstock two times and fussy cut out.

6. Stamp each of the leaf stamps in Old Olive ink on Whisper White cardstock one time each, punch out the one coordinating leaf with the punch, and fussy cut the other two out.

7. Stamp the sentiment in Terracotta Tile ink on a ½” piece of Whisper White cardstock, snip off at the end, and use the Banner Triple Punch on the other end.

8. Use a ¾” x 1 ¾” piece of Old Olive cardstock for layering under the sentiment and use the Banner Triple Punch on one end.

First, I layered the stems where I wanted them and then adhered them with liquid glue:

Next, I adhered the two medium tulips with liquid glue and the small and large tulips with dimensionals:

I then adhered the other two tulips and one of the leaves with dimensionals:

Finally, I adhered the last two leaves with liquid glue:

The tulle bow is adhered to the “bouquet” with a dab of liquid glue, the sentiment pieces are adhered together, and then adhered to the base layer. This completed piece is adhered to an Old Olive cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Terracotta Tile ink, and adhere a ¾” strip of DSP along the bottom:

Don’t you just love this stamp set?? Especially since tulips come in a variety of colors, it is so easy to create a bouquet in your favorite colors! If you don’t like to fussy cut, it is very easy to stamp the stems and tulips and then build up with the punch for the large tulip and leaves! This bundle will be available for purchase starting January 3rd, so don’t forget to add this to your list for the 2020 Mini Catalog!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Thankful for you!

Hello and welcome to today’s card, which is a beautiful Thanksgiving card make with everything from the Annual Catalog! This card was a two-fold challenge for me, one-create a card with Terracotta Tile, and two-use products from the Annual Catalog. I will have to admit, figuring out colors to use with Terracotta Tile for a Fall/Thanksgiving themed card was more of a challenge! In the end, I love how Terracotta Tile pairs with Merry Merlot and adding just a pop of yellow and green keeps the fall theme!

The base layer for this card is Whisper White cardstock, cut at 4” x 5 ¼”, and then the next layer is this design in Terracotta Tile from the 2019-2021 In Colors 6” x 6” DSP, cut at 3 ¾” x 5”:

For the card front you will need:

1. On Old Olive cardstock, stamp the leaf in Mossy Meadow ink three times and punch out with the Leaf Punch.

2. Stamp the sentiment in Merry Merlot ink on Whisper White cardstock and cut out with the third largest rectangle from the Rectangle Stitched Framelits Dies. Use the second largest rectangle to cut out a layering piece on Merry Merlot cardstock.

3. On Whisper White cardstock, stamp the first flower stamp in Terracotta Tile ink, use a sponge dauber with Merry Merlot ink on the detailed flower stamp, and use a sponge dauber with Daffodil Delight ink for the flower center to create two flowers. I fussy cut these out of the cardstock, use a sponge dauber with Terracotta Tile ink around the edges, and then lightly went over the whole flower with Wink of Stella:

Adhere the base layer and DSP together, adhere the sentiment and layering piece together, and then adhere the sentiment piece to the DSP:

I positioned the flowers around the sentiment piece and then inserted the leaves to where I wanted them underneath the flowers. I removed the flowers, adhered the leaves in place with glue dots, and then adhered the bottom flower with snail and the top flower with dimensionals:

This piece is then adhered to a Merry Merlot cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”. I added three of the copper Designer Elements along the bottom:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment in Merry Merlot ink, and then adhere a ½” strip of the same design DSP along the bottom, trimming off the excess (this from a 1” strip that I had from cutting the front piece, cutting in half):

Don’t you love the colors use for this card? They are “fall like” colors, but not typical colors you may use for your Fall/Thanksgiving cards and crafts. On top of all that, it was created with products that you probably already have on hand from the Annual Catalog! 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Give your embossed cardstock some heat and shine!

Hello and welcome to today’s card, which not only features the Country Home stamp set, but one of the new embossing folders from the Holiday Catalog, Stylish Scroll! I just love this embossing folder and I will be using it for my Halloween cards, but I thought today I would not only combine it with a stamp set you may already have and give the embossed cardstock a different look with heat embossing!

The base layer is Highland Heather cardstock, cut at 4” x 5 ¼”, and embossed with the Stylish Scroll EF. I just “dragged” my Versamark pad across the embossed cardstock, sprinkled Silver Emboss Powder, and set with my heat tool:

You will also need this design from the 2019-2021 In Colors 6” x 6” DSP in Purple Posy cut at 2” x 5 ¼” (this was left over from another card I made, ready to use!), the sentiment is stamped in Gray Granite ink on a ½” scrap of Whisper White (you know those leftover strips when you cut your WWCS down to 4” x 5 ¼”), used the Banner Triple Punch on the end, stamp the jug in Memento ink, color along the edge and bottom with Light Smoky Slate, the next layer in with Dark Gray Granite, and the middle the Light Gray Granite Stampin’ Blends, I used Light Purple Posy just a little in the middle, and then blended with the Color Lifter, the top piece is stamped in Memento ink and colored in with Dark Gray Granite, Light Granny Apple, Dark Highland Heather and Dark Purple Posy Stampin’ Blends, fussy cutting both pieces:

The DSP is adhered to the embossed base layer, the top flower piece is adhered to the jug, the sentiment is adhered behind the jug, and this completed piece is adhered to the DSP with dimensionals:

This completed layer is adhered to a Gray Granite cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

The inside is a 4” x 5 ¼” piece of Whisper White cardstock, the flowers from the card front are stamped twice along the bottom in Memento ink and colored in with the same Stampin’ Blends:

Super cute card!! You can easily make this more of a “fall theme” by just changing the colors. What do you think of the new embossing folder?? This really is versatile, I see it being used for Halloween, Thanksgiving, and Christmas! And them some!! Don’t forget the new Holiday Catalog goes live on September 4, 2019!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

The focus is all on you!

Hello and welcome to today’s card, which is a fun and quick card featuring the Capture the Good stamp set! I recently purchase some of the new Shimmer Black Emboss Powder and thought it would be fun to give the camera from this stamp set a little sparkle! I wasn’t sure what to expect from the new embossing powder, but I really like how the shimmer is very subtle and you can really see it from an angle, which is nice and unlike glitter, if you were thinking that this embossing powder may be similar to.

The base layer is Seaside Spray cardstock, cut at 4” x 5 ¼”, and the next layer is Whisper White cardstock, cut at 3 ¾” x 5”:

You will also need a 1 ½” x 3 ¾” piece of Seaside Spray DSP from the 2019-2021 In Colors 6” x 6” DSP, stamp the camera in Versamark on Basic Gray cardstock, heat emboss with the Shimmer Black Emboss Powder, and fussy cut out:

I stamped the sentiment on the Whisper White cardstock in Basic Gray ink (stamping off once first) and then adhere to the Seaside Spray cardstock:

The sentiment is stamped on the DSP in Basic Gray ink several times, using my Stamparatus, to make sure the image is dark enough on the DSP, and then adhere the DSP onto the cardstock:

The base layer is adhered to a Basic Gray cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”, the camera is adhered with dimensionals, and I added one of the large Seaside Spray Faceted Dot to the middle of the camera lens:

The inside sentiment is on Whisper White cardstock, cut at 4” x 5 ¼”, the accent stamp is stamped in Seaside Spray ink and the sentiment is stamped in Basic Gray ink:

Very quick and easy card, right?? Adding simple cardstock layers and creating your own “DSP” with a stamp is a quick and easy way to give your card that little extra! Add some heat embossing and some embellishments and you have a super cute card that will sure to brighten someone’s day!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Versamark Pad

 

 

Embossing Buddy

 

 

Stamparatus

 

 

Snail Adhesive

 

 

Sending you well wishes

Hello and welcome to today’s card, which is a sweet card to send when someone you know needs a little pick-me-up! This card has lots of textures and layers, but is so very easy to make! If you haven’t checked out the Noble Peacock Foil Sheets and Rhinestones, you should! The colors for both of these are just stunning and coordinate beautifully!

To start, your base layer is Pretty Peacock cardstock cut at 4” x 5 ¼” and embossed with the Subtle 3D Emboss Folder:

I used this design from the 2019-2021 In Colors 6” x 6” DSP, first cut the bottom piece at ¾” x 6” and then cut at 2” so you will have one piece 4” x 5 ¼” and another piece at 2” x 5 ¼”. For this card you will need the ¾” x 6” and 2” x 5 ¼”:

You will layer the DSP on a piece of Pool Party cardstock, cut at 2 ¼” x 5 ¼” and adhere to the embossed cardstock base layer:

Cut another piece of Pool Party cardstock at 3 ¼” x 3 ¼” and a piece of Pretty Peacock foil sheet at 2 ¾” x 2 ¾”. Heat emboss the dandelion image on the foil sheet in White Embossing Powder, keeping the heat on low or being very careful not to heat too much as the foil will start to melt. On a scrap piece of Whisper White cardstock, I stamped the dandelion seeds in Pool Party ink, ink the sentiment first in Versamark ink and then Pretty Peacock ink, stamp on the cardstock, and heat emboss using Clear Embossing Powder, cutting out with the 5thfrom the larges scalloped Layering Circle Die:

The embossed foil sheet is layered on top of the Pool Party cardstock and adhered to the base layer. To adhere the sentiment, apply adhesive to the top half (to adhere to the foil) and use a couple of dimensionals on the bottom half to adhere to the embossed base layer:

This completed piece is adhered to a Gray Granite cardstock card base, cut at 4 ¼” x 11” and scored at 5 ½”. I added a rhinestone in Pretty Peacock to the middle of each dandelion:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, adhere the ¾” strip of DSP along the bottom, trimming off the excess, stamp the dandelion seeds in Pool Party ink, and the sentiment from Itty Bitty Greetings in Pretty Peacock ink:

Don’t you just love pairing Pool Party with Pretty Peacock? The layout of this card is very easy to replicate with any stamp set, DSP, and color combo!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

Versamark Pad

 

 

Embossing Buddy

 

 

Snail Adhesive

 

 

Quick and easy with Itty Bitty Birthdays

Hello and welcome to today’s card, which is a quick and easy card to make with Itty Bitty Birthdays stamp set! This fun and cute stamp set has 16 different sentiments, some can be used outside of a birthday card. I wanted to share with you a fun and easy card design featuring this stamp set and you can easily change the DSP to whatever kind you want to use!

I chose the Purple Posy gingham design from the 2019-2021 6” x 6” In Color DSP. I first cut a ¾” x 6” strip off one side, turned the paper, and then cut at 4”. This will give you three pieces, one at ¾” x 6”, one at 4” x 5 ¼”, and one at 2” x 5 ¼”, the 4” x 5 ¼” will be the base layer for this card:

You will cut a piece of Purple Posy cardstock at 2” x 5 ¼” and then a piece of Whisper White cardstock at 1 7/8” x 5” to layer on top of the Purple Posy cardstock:

I chose 5 sentiments and used my Stamparatus to line them up on the Whisper White cardstock, stamping them in Versamark Ink and heat embossing in Silver Emboss Powder. This piece is then adhered to the Purple Posy cardstock layer:

I used some Silver Metallic Edge Ribbon to tie a bow around the DSP (or cut enough ribbon to adhere across the front, tie some ribbon into a bow separately, and then adhere the bow with a glue dot), adhere the DSP to a Smoky Slate cardstock card base, cut at 4 ¼” x 11” and scored at 5 ½”, and then adhere the sentiment piece with dimensionals:

The inside is on Whisper White cardstock, cut at 4” x 5 ¼”, the sentiment is stamped in Versamark ink and heat embossed in silver, the ¾” strip of DSP is adhered across the bottom, trimming off the excess:

Quick and easy card, right?? If you don’t like to heat emboss, you can easily use a coordinating ink! This card is a great way to make a super cute card and use up your DSP!! 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List