Sale-A-Bration Blog Hop!

Hello and welcome to the Stamp It Group’s Sale-A-Bration Blog Hop! My name is Christina Miller and you are visiting my blog, Christina’s Creative Corner! Whether this is your first stop on the blog hop tour or have hopped on over from another blog, thank you for letting me share my creation with you today!

For my card, I have combined some of my favorite Sale-A-Bration products with products from the 2019-2020 Annual Catalog and a little sneak peek of a new Sale-A-Bration Vellum DSP that will be available for purchase on March 3rd! The Lovely Lily Pad stamp set is one of my favorites and I love how versatile it is to color, stamp, and cut out with the coordinating dies, you can truly create whatever colors you like!

The base layer is Pretty Peacock cardstock, cut at 4” x 5 ¼”. The next layer is Whisper White cardstock, cut at 3 ¾” x 5”. I mixed up a little bit of Embossing Paste with a small drop of Pretty Peacock ink refill on my Silicone Craft Sheet. On a scrap piece of paper, I taped the Whisper White cardstock down (on the sides) and then taped down the diamond decorative mask over top. I smeared the colored Embossing Paste from the top left corner to the bottom right corner over the mask:

For the rest of the card front, you will need:

1. A strip of this design from the Lily Impressions DSP, cut at 1” x 4”.

2. Cut a ¾” x 4” of the Pretty Peacock Foil Sheet and use the decorative die to cut out.

3. Use the 2 ¼” Circle Punch to punch out of the Pool Party So Very Vellum Specialty DSP (this comes in Pool Party, Purple Posy, Soft Sea Foam and is embossed!!).

3. On a piece of Whisper White cardstock, stamp the large lily stamp first in Versamark ink, then in Pretty Peacock ink, and then on the cardstock. I then heat embossed the image in Clear Emboss Powder (a great way to emboss in the color of your choice!). The lily was then colored in with Dark Pretty Peacock, Light Bermuda Bay, and Light Pool Party Stampin’ Blends and cut out with the coordinating die.

4. For the leaves and lily pad, I stamped them in Versamark ink and Mossy Meadow ink on Whisper White cardstock and heat embossed with Clear Emboss Powder. I colored them with Dark Old Olive and Light Granny Apple Green Stampin’ Blends, using the Color Lifter to lighten the center of the leaves, and cut out with the coordinating dies.

5. You will also need two of the 5mm and four of the 3mm Pretty Peacock Rhinestones.

The leaves are adhered to the back of the lily with glue dots, the lily is adhered to the lily pad with glue dots, and this piece is adhered to the vellum circle piece. The decorative foil piece is adhered to the DSP with liquid glue:

I adhered the two cardstock layers together and then the DSP strip across the middle:

The lily pad piece is adhered with dimensionals and then I placed the rhinestones in the blank corners:

This completed piece is adhered to a Whisper White cardstock card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

For the inside, I cut a piece of Pretty Peacock cardstock at 4” x 5 ¼” and layered a piece of Whisper White cardstock, cut at 3 ¾” x 5”, on top. The sentiment is stamped in Pretty Peacock ink and the lily in the corner is stamped and colored the same way as the lily on the card front:

Isn’t this a fun card?? I usually like to stamp the lily on colored cardstock and then cut out with the coordinating die, but I really liked how the lily turned out using Stampin’ Blends! This is really a great way to create lilies in the colors of your choice! 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

This month’s giveaway:

The winner from last month’s Valentine’s Day Blog Hop is:

Don’t forget to scroll down to leave you FIRST and LAST NAME and a comment with #stampitcontest and keep on hopping to the next name on the Blog Hop Tour:

1. Tami White  
2. Luly Gonzalez  
3. Tina Wardell  
4. Christina Miller  
5. Pam Nichols  
6. Shannon Lorenz-Hatch  
7. Lori Mueller  
8. Mary Bush  
9. Rachael Rife  
10. Lori McBride  
11. Kim Quade  
12. Karen Page  
13. Dawn Seelhoff – dawnsinklings.com  
14. Linda Cullen  
15. Gigi Melone 

Product List

Hey, Little Ladybug!

Hello and welcome to today’s card, which features two products from the 2020 Sale-A-Bration catalog and a sneak peek at an upcoming product available February 4th! The Little Ladybug stamp set is a special SAB Hostess set that you can earn with a $300 (USD) product purchase and if you are on the fence about this set, well there is a coordinating die set that will be available for purchase starting February 4th for $29 (153588)! Not only do the dies cut out the four individual ladybugs, the full large flower, and just the top petal part, but it also has some super cute accent dies that also emboss! The coordinating dies were the clincher for me and as I demonstrator I could buy them NOW! lol I paired this set with the Stone 3D Embossing Folder from the Power of Hope Bundle (also in the SAB catalog) to create this sweet birthday card!

The base layer is Basic Gray cardstock, cut at 4” x 5 ¼”, and embossed with the Stone 3D EF:

For the card front, you will need:

1. On Whisper White cardstock, stamp the sentiment in Memento ink and punch out with the Classic Label Punch. Use the punch one more time with Lovely Lipstick cardstock, this will be layered under the sentiment.

2. Stamp the two ladybugs in Memento ink on Whisper White cardstock, color the “wings” and top of the head with Dark Lovely Lipstick Stampin’ Blends, and then color the back and the flower with Light Lovely Lipstick Stampin’ Blends. Let this dry for a moment before using Wink of Stella on the wings and flower. Cut these out with the coordinating die.

3. Use the flower die to cut/emboss three pieces from Lovely Lipstick cardstock and then place a small (3mm) Rhinestone Basic Jewel in the middle of the flower.

4. Use the 2” Circle Punch to cut out a piece of Whisper White cardstock and the 2 ¼” Circle Punch to cut out a piece of Lovely Lipstick cardstock. Stamp a section of the All Wired Up Background stamp in Versamark ink and heat emboss with Black Emboss Powder. These two circles will be layered together.

To assemble the card front, adhere the layered circled about the middle of the embossed base layer and adhere the ladybugs with dimensionals. Adhere the Classic Label Punch pieces together with the Lovely Lipstick layer sticking out on the left side, this is adhered to the embossed base layer with mini dimensionals. The three flowers are adhered to the embossed base layer:

This completed piece is adhered to a Basic Black cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the sentiment and little ladybugs in Memento ink, color in the ladybugs with Light Lovely Lipstick Stampin’ Blends, and then add some Wink of Stella:

Isn’t this set so stinking cute?? I just love this time of year with the Mini (previously called Occasions Catalog) and the SAB Catalogs! This is a great time to restock on supplies that you have used up from the holidays and earn free products! 

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List

The Cat and the Moon

Hello and welcome to today’s card, which is another fun Halloween card made with the Wonderfully Wicked stamp set! It wouldn’t be Halloween card making without a “cat and the moon” card with the nighttime sky in Halloween colors! Would you believe that I used the Birch background stamp to create the “spooky mist”?? That’s right, if you position the paper just right, you can get this effect with the Whisper White Craft Ink and your Stamparatus! Just another reason to get this background stamp if you don’t already have it!

Your base layer is Whisper White cardstock, cut at 4” x 5 ¼” and use the 2 ¼” Circle Punch at the bottom of the cardstock to punch out the circle for the moon, and then you will need a 2 ½” x 4 piece of Basic Gray cardstock:

For the sky, use sponge brayers to color with Mango Melody, Granny Apply Green, and Gorgeous Grape inks.

For the moon, I simply pressed the circle cardstock directly onto my Pineapple Punch stamp pad and used my finger tips to press into the ink, which gives the illusion of texture on the moon.

For the brick wall, spritz the paper with water and emboss with the Brick & Mortar 3D Folder. I then used a sponge dauber with Basic Gray ink to give the embossed side depth.

I stamped the cat in Memento Ink on the moon, using my Stamparatus so I could ink the stamp repeatedly to get a very dark image (about 3 times). I laid the brick wall on the base layer to use as a guide to adhere the cat in the moon correctly:

If you look at the Birch background stamp, you will see that around the middle area that there a just lines and no wood detail and this is where I lined up the base layer to be stamped with Whisper White Craft ink. Use your Stamparatus for this step as well:

The brick wall is adhered to the base layer with black dimensionals:

The sentiment is heat embossed with Shimmer Black Emboss Powder, punched out with the Tailored Tag Punch, use the large gray enamel dots from Monster Bash on each side, adhere to the brick wall, and then this completed piece is adhered to a Basic Black cardstock card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

For the inside, use a 4” x 5 ¼” piece of Whisper White cardstock, stamp the bats in Memento ink, heat emboss the “wicked” with Shimmer Black Emboss Powder, and stamp the rest of the sentiments with Basic Gray ink:

Isn’t this a fun and cute card? This was really easy to make and I really liked the idea of creating a different colored sky, I almost started out making a typical nighttime colored sky!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products.

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Product List