Lasting Lily and what I learned for the best stamped image

Hello and welcome to today’s blog, which is some tips and tricks I learned experimenting with the stamp set Lasting Lily. This set can be found in the 2019 Sale-A-Bration mini catalog, which you can earn for FREE with a qualifying $100 product purchase. What really caught my attention, are the beautiful sentiments and I thought it would pair wonderfully with the Kindness & Compassion stamp set from the Annual Catalog. Lasting Lily is not only a 2-Step stamp set, but it is also Distinktive. What is Distinktive? It is when the stamp lays down the ink at different opacities giving the finished image more depth. My first (and until now only) Distinktive stamp was Heartfelt Blooms from last year’s SAB catalog. That stamp was a red rubber stamp and Lasting Lily is a photopolymer, which they stamp differently. So, when I sat down to experiment with different colors with Lasting Lily, imagine my surprise when the stamped image looked not quite right…

I pre-cut Whisper White and Very Vanilla cardstock to 4” x 5 ¼” to have plenty on hand, especially for the inside sentiments. This is a great way to experiment with stamps if you are seeing how the final image looks or are trying to figure the best color to use. I thought that Petal Pink or Blushing Bride would be good colors to start with and I did not like the stamped image, wasn’t very Distinktive as the image from the case insert for the set. Fast forward after experimenting with a variety of variables, the bottom line is that if your ink pad has too much ink, you will not get the best stamped image.

What do you mean too much ink and how does that even happen?? 

It can happen one of two ways: either it comes to you with too much ink or you use your ink refill and apply too much. I’ve had both happen.

How can I “remove” or “take up” this excess ink?? 

There are three ways that I can suggest:

1. Use the back of a spoon and using a “sweeping motion”, push the ink down on the pad:

2. I use these blue shop towels for cleaning (better than paper towels and leaves little to no residue) and you place this on top of the ink pad and gently press down to absorb some of the excess ink:

3. If you have an ink pad that is really inked up, take a couple pieces of printer paper, fold it in half, and lay that on top of the ink pad and gently press down so the paper can absorb the excess ink:

Repeat any of these steps as necessary. One way to really tell that you have too much ink without even stamping on a piece of cardstock, is the stamp itself. If you see any bubbling on the inked image, then you will not have a clean and precise image that you desire, you can see that in the stamped images above. This is totally my opinion and what I found worked for me, you may find other results. I know that it is suggest that with photopolymer stamps to use a Stampin’ Pierce Mat underneath your cardstock, but I didn’t find any additional help in this case and I also already have a mat that I use under my grid paper for stamping. I hope this helps you, if you too run into the same issues I had. This is a beautiful stamp set and I hope you have fun making lots of wonderful cards!

Here is a quick tutorial for the card that I made with this set:

The card base is Mossy Meadow cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”. I used the embossing thinlit from the Stitched Labels Framelits on the upper left and lower right corners:

The stems and leaf are stamped in Mossy Meadow ink and the lilies are stamped in Mango Melody ink on Whisper White cardstock. This is then cut out with the 3rdlargest Rectangle Stitched Framelit Die, which measures 3 1/8” x 4 ½”. I tied a piece of the Braided Linen Trim into a bow across the bottom and then layered this on a piece of 3 ¼” x 4 5/8” piece of Wood Textures DSP:

This is then adhered to the card base with dimensionals:

Quick and easy card to make for any occasion!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!  

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors

Product List

Love is in the air!

Hello and welcome to today’s card, which is a super cute and easy Valentine’s Card! I thought the Lift Me Up stamp set and the Up & Away Thinlits Dies would be perfect for making a alternative type of Valentine’s Day card, meaning if you didn’t want one that was “frilly and gushy”, lol! 

The card base is Thick Whisper White cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”. The base layer is Lovely Lipstick cardstock, cut at 4” x 5 ¼”, and the next layer is this design from the All My Love DSP, cut at 3 ¾” x 5”. Since this is a horizontal card, make sure that you are cutting the DSP in the right direction. First adhere the DSP to the cardstock base layer:

The front of the card elements includes the big detailed hot air balloon and heart dies, cut out of Lovely Lipstick Foil Sheets, the sentiment is stamped in Lovely Lipstick ink and punched out with the Classic Label Punch, 1 big and 2 small clouds stamped on Whisper White cardstock in Powder Pink ink and cut out with the coordinating die, and then 3 Heart Epoxy Droplets, one in each size. Notice that one of those hearts are colored? Well, you can use those Stampin’ Blends to color them whatever color you would like! I am using clear for this card:

To assemble the card front, I wanted the hot air balloon to pop up, so I used Mini Dimensionals, which I cut in half, and placed in areas that they would not be seen, all three clouds are popped up with dimensionals, the foil heart is adhered to the DSP with the sentiment adhered on top, and then I placed the 3 epoxy hearts:

For the inside, I stamped the two small hot air balloons in Powder Pink ink and the bigger balloon in Lovely Lipstick ink. The sentiment is from Forever Lovely in Lovely Lipstick ink:

This card was so easy to make that I actually made 6 cards from this sheet of DSP and yes, there are pieces of DSP left over that I could easily make another 2-3 cards out of. I figured I better get a move on for my cards that I send out to friends and family! Lol 

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!  

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors

Product List

Quick and easy Valentine’s Day card

Hello and welcome to today’s card, which is a quick and easy Valentine’s Day card I made with pieces of cardstock and DSP with the Be Mine Stitched Framelits. When Sweet & Sassy Framelits retired from the last annual catalog, I was bummed! So, when I saw the Be Mine Stitched Framelits, I just had to get them! Now I didn’t get the coordinating stamp set, Meant to Be, which is totally ok, this isn’t the first time I’ve bought the framelits and not the stamp set. However, these framelits do coordinate with the All My Love DSP and this is how I came up with today’s card.

The design from All My Love DSP with the Flirty Flamingo and Lovely Lipstick flower hearts can be cut out with the 3rdlargest and the smallest heart framelit. The 3rdlargest heart actually cuts out twice, giving you a heart design and then a scalloped stitched heart frame:

Then if you flip over the white heart frame, you have the other side of the DSP! Rather than wasting these hearts, I thought I would try and do something to incorporate them into a simple Valentine’s card.

To create the card front, start with a piece of Real Red cardstock, cut at 4” x 5 ¼”, and use Real Red ink to stamp the Crackle Paint background stamp. The bigger heart is cut out of Blushing Bride cardstock using the largest narrow heart and sponge some Frost White Shimmer Paint all over. The two small white hearts are from the long multiple heart framelit and I put some Wink of Stella on them, but you can’t really see it. Finally, you will need two of the scalloped heart frames and a piece of Flax Ribbon, cut about 4”:

To assemble, I adhered the ribbon with Tear & Tape across the middle of the Real Red cardstock, adhered the heart frame with the Fine Tip Glue Pen, adhered the Blushing Bride heart with dimensionals, adhere the second heart frame with the Fine Tip Glue Pen, and then adhered the small hearts with mini dimensionals. This completed piece is adhered to a piece of Smoky Slate cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

The inside is on a piece of 4” x 5 ¼” piece of Whisper White cardstock. The inside heart is cut out of Real Red cardstock and adhered with the Fine Tip Glue Pen, the sentiment is stamped in Real Red ink, and the small hearts are stamped in Blushing Bride ink:

If you are like me and send Valentine’s cards to family and friends, you kind of want them to be not so much on the romantic side, but still cute and fun! This is a great way to send a card and let them know you are thinking of them! 

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!  

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors

Product List

Color me Beach Happy!

Hello and welcome to today’s card, which features the new stamp set Beach Happy! The beach really is my happy place, so another beach stamp set? Yes, please! Lol Would you believe that the coloring was done totally with Brusho?? That’s right, just mix the powders until you achieve the color you want! 

The idea for this actually came to me to create a “post card” like card. Remember back in the day when friends and family would go on vacation and they would find cute and funny post cards to send? (Think of “wish you were here”) So, I thought I would give it a try and see how it turned out! 

I first started out with a piece of Thick Very Vanilla cardstock, cut at 3 ¾” x 5”. The palm tree trunk is heat embossed, first stamping in VersaMark ink, then stamping in Crumb Cake ink, and Clear Embossing Powder is used. For the rest of the stamps, I heat embossed Gold Embossing Powder:

I picked up this muffin style palette a while back from one of the big box craft stores for just a couple of dollars. I like to use this when I use Brusho, whether it’s for single colors or mixing the colors. For the sand, I mixed Yellow, Gamboge, and a little bit of Brilliant Red. The chair is colored in Yellow, the bag is colored in Moss Green, and the hat and umbrella are colored in Brilliant Red, with some Yellow added to the umbrella to give kind of a “weathered” look. The sky is colored using Prussian Blue, I made sure to use it lightly by not getting too much of the ink on my Aqua Painter. To create the water, I mixed Prussian Blue and Moss Green until I achieved my desired color:

After I finished “painting” and letting the cardstock dry, I wanted to add some more depth to the card by using some Shimmery White Embossing Paste to create the “waves crashing on the shore”. The best way I have found to apply a minimal amount of embossing paste is to cut a Q-Tip in half and use the stick end. I also wanted to add some “waves” out in the water and since using the wave stamp that is in this set was not really going to work, I got out this small lined stamp from High Tide and stamped that in Whisper White Craft ink:

Once this piece is completely dried, I adhered it with a strong adhesive (the paper warps some with the heat embossing and water coloring), either Liquid Glue, Tear & Tape, or even Fast Fuse if you have some of this left, onto this design of DSP from Tranquil Textures, cut at 4” x 5 ¼”. This piece is then adhered to a Tranquil Tide card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

The inside is a piece of Very Vanilla cardstock, cut at 4” x 5 ¼”, with the sentiment from the stamp set, palm tree, and bag all heat embossed:

So, are you dreaming of the beach right now? Or maybe just somewhere warmer! Lol If you’ve thought about Brusho Crystal Colour or maybe you have it and are a little intimidated about how to use it, just experiment! This was actually my second go at this card, the first one I did not like the sky at all and so I started over! Also, having something to mix the colors in helps as well and you can control the depth of the color by how much water you add, which I just squeeze water from my Aqua Painter.

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!  

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors

Product List

What kind of crafter are you?

Hello and welcome to today’s blog, which is geared towards you and what kind of crafter you are. Have you ever given it any thought? Are you just beginning your crafting journey? Maybe you have been making cards for a while and make them as needed? Better yet, you have a designated crafting area and like to spend time making cards to have on hand and readily available? When I attended OnStage in November, Stampin’ Up! talked about this and really gave some food for thought. Sometimes as a demonstrator we get caught up in all the new products and how to incorporate them all and make all these fabulous cards, but if you are just starting this can be very overwhelming and not know where you should start! So today I am going to make 3 cards and discuss what kind of crafter you are!

#simplestamper

You may or may not have seen this, but what a simple stamper is, is someone who is just starting out as a crafter. As I said before, figuring out where to start can be very overwhelming. One of the things that attracted me to SU! years ago was the color and product coordination. When you start, it is easiest to start with paper, ink, and stamp. No matter what catalog you are first introduced to, not only are there beautiful example for you to CASE (Copy and Share Everything or Copy and Selectively Edit), but you are given a list of colors for coordination. So now where do I start? The best suggestion I can give is start with what kind of card you want to make. I have 3 categories that I put my card making in, starting with the most made to have on hand/make as I need: 1) Birthday 2) Holiday (Valentine’s Day, Easter, Mother’s Day, Father’s Day, Halloween, Thanksgiving, Christmas, and New Year’s) and 3) All Others (Anniversary, Wedding, Baby, Condolence, Get Well, ect). Whether you are limited on time, space, or even budget, start off with what works best for you and do not ever think that you cannot make a beautiful card with just paper, ink, and stamps! We all start out as a #simplestamper! Lol

#simplestamper

For this example, I chose to use the Forever Lovely stamp set, Lovely Lipstick and Whisper White cardstock, and Lovely Lipstick, Flirty Flamingo, and Memento inks:

Lovely Lipstick cardstock base: 4 ¼” x 11” and scored at 5 ½”

Whisper White cardstock: (2) 4” x 5 ¼”

On the base layer of Whisper White cardstock I stamped the heart image in Lovely Lipstick and Flirty Flamingo inks and the sentiment is stamped in Memento ink:

The inside piece of Whisper White cardstock, the sentiment is stamped in Lovely Lipstick ink and the small hearts are stamped in Lovely Lipstick and Flirty Flamingo inks:

Product List

#casualcrafter

What is a casual crafter? This is generally someone who has basic supplies and start adding punches, embellishments, and ribbon to their cards. They may or may not have a designated crafting area, but make cards “as needed”.

For this example, I used the Forever Lovely stamp set, All My Love Designer Series Paper, Lovely Lipstick and Flirty Flamingo inks, 3 punches, ribbon, and an embellishment:

Lovely Lipstick cardstock base: 4 ¼” x 11” and scored at 5 ½”

All My Love DSP base layer: 4” x 5 ¼”

Punches-Starburst in Lovely Lipstick cardstock, 2” Circle Punch in Flirty Flamingo cardstock, 1 ¾” Circle Punch in Whisper White cardstock

Ribbon-Silver Metallic Edge Ribbon cut at 6”

Embellishment-Heart Epoxy Droplets

Since the sentiment is too long for the circle punch, I first stamped You Are, cleaned the stamp, and then stamped Loved underneath. Since this is photopolymer, it made it very easy to see the words at the edge of the ink pad, however, you can always mask what you don’t want inked with a piece of tape. I layered the circles, stamped the small hearts in Flirty Flamingo ink, and then added 3 of the smallest Heart Epoxy Droplets. The ribbon is adhered to the DSP, the layered circles are adhered with dimensionals, and then this piece is adhered to the card base:

For the inside, cut a piece of Whisper White cardstock at 4” x 5 ¼”, stamp the heart stamp along the side and the small hearts in Flirty Flamingo ink, and stamp the sentiment in Lovely Lipstick ink:

Product List

#avidcrafter

What is an avid crafter? This is generally someone who has a designated crafting area/room, makes cards for any occasion, and spends time making cards ahead of time. An avid crafter also has really everything they need to create a card, big shot, heat tool, ribbons, embellishments, etc.

For this example, I used the Forever Lovely Bundle, All My Love DSP, and the Be Mine Stitched Framelits to create this card:

The card base is Soft Sea Foam, cut at 4 ¼” x 11”, and scored at 5 ½”.

The base layer is All My Love DSP, cut at 4” x 5 ¼”.

The sentiment is stamped in Lovely Lipstick ink.

I used the Lovely Flowers Edgelits Dies on the sentiment cardstock, the Lovely Lipstick cardstock layer underneath, and cut two leaves in Soft Sea Foam cardstock.

The heart is cut out of Vellum cardstock using the biggest heart framelit.

For added embellishment, I used Whisper White Baker’s Twine wrapped twice around the DSP, 2 of the large Heart Epoxy Droplets colored with Dark Flirty Flaming Stampin’ Blends, and traced the cut out rose with Wink of Stella:

The inside sentiment is on a piece of 4” x 5 ¼” Whisper White cardstock, stamped in Lovely Lipstick ink. The flowers are stamped in Lovely Lipstick ink, cut out with the coordinating die, and the leaves are stamped in Soft Sea Foam ink, cut out with the coordinating die. One of the flowers and both leaves are popped up with dimensionals:

Product List

So, after all this, what kind of crafter are you? Of course, I’m an avid crafter! But then again, it took me a long, long time and it also required a bedroom that I could turn into a craft room, which didn’t happen until my oldest son left home (we are “empty nesters”, both of my sons are serving in the military). I definitely started out as a simple stamper, budgeted, and planned what supplies I needed…and I still do! Remember that you don’t have to feel overwhelmed and need to buy the whole store! Lol Even if you feel that you’re “not that crafty”, Google is your friend and you will find so many beautiful cards to inspire you and/or CASE! 

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!  

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors

Birthday shaker card!

Hello and welcome to today’s card, which features the new Amazing Life Bundle from the 2019 Occasions Catalog! What’s amazing about this bundle?? The Rectangle Stitched Framelits Dies of course! lol But seriously, these dies make making a “shaker card” an absolute breeze! With the layering circle, square, and oval dies, you had to line up two of the dies (and hope and pray they don’t move) in order to complete the “frame”. Now with the rectangle dies, they do it in one easy step!

The dies feature stitching on the inside and outside of the frame, so when you are done, you have two pieces that feature the stitching! As you can see, there are 13 dies and they layer together beautifully. The possibilities with this set are enormous!

To create today’s card, start with a card base in So Saffron cardstock,
4 ¼” x 11”, and scored at 5 ½”:

The base layer is Soft Sea Foam cardstock, cut at 4” x 5 ½” and is embossed with the Subtle Dynamic TIEF, which I inked up first with Soft Sea Foam ink:

The next layer is this design from the Garden Impressions 6″ x 6″ DSP, cut at 4 ½” x 3″:

To create the frame for the shaker card, I cut a piece of Powder Pink cardstock, cut at 2 ¼”  x 3 5/8″, and I used the 3rd smallest rectangle die to cut out the middle:

For the rest of the card, you will need a piece of Window sheet and Whisper White cardstock (cut at 2 ¼” x 3 5/8″), the sentiment from Amazing Life stamp set stamped in Powder Pink ink, Iridescent Sequins, and 2 small and 2 large balloons cut out of Champagne Foil sheet with the Balloon Bouquet Punch, tying Whisper White Bakers Twine around the bottom of the balloon:

To create the shaker part of the card, I first glued the window sheet to the frame using the Fine Tip Glue Pen. I also glued a couple of the sequins to the stamped cardstock with the Fine Tip Glue Pen and the Take Your Pick tool:

I used the Foam Adhesive Strips around the edge of the frame and then placed some of the sequins in the middle:

I removed the backing off the foam strips and placed the stamped cardstock image on top:

To assemble the front of the card, I adhered the base layer to the card base and then adhered the the DSP on top at a slight angle:

The shaker piece is then adhered on top, I recommend a strong adhesive:

I then adhered two of the balloons to the front, one to the frame and the other with a dimensional:

For the inside sentiment, use a piece of 4” x 5 ½” piece of Whisper White cardstock, the cake is stamped in Soft Sea Foam ink, the sentiment is in Powder Pink ink, and the bottom image is stamped in So Saffron ink. I adhered the two remaining balloons to the side:

Wasn’t that way easier to make than before? If you have never made a shaker card before because you found it just too difficult, give these dies a try! Just simply cut a piece of cardstock, that is going to be the frame, slightly larger so you have enough room for the foam strips. Wondering how I got the baker’s twine so curly? I simply used my bone folder, just like you would so for curling ribbon with a pair of scissors!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!  

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors

Product List

Fun with Florentine Filigree

Hello and welcome to today’s card, which features the new Florentine Filigree Bundle from the 2019 Occasions Catalog! I first saw this bundle when I was in Orlando in November for OnStage and just loved the Florentine Thinlits Die. This is such a beautiful and versatile die, which would create a great background for any card, but what about the coordinating stamp set? The Stamparatus is a must because you can stamp the coordinating stamps perfectly with the die cut cardstock layered on top! So today I thought I would show you how to create a beautiful card with this bundle, step by step. I will also include a link to Stampin’ Up! YouTube video for this bundle at the end of this blog.

I started with Blueberry Bushel cardstock for my card base, cut at 4 ¼” x 11”, and scored at 5 ½”:

The top layer of cardstock that will be cut out with the Florentine Thinlits Die, so I cut out another piece of Blueberry Bushel cardstock cut at 4 ¼” x 5 ½”:

The Whisper White cardstock that will be stamped on for underneath, is cut slightly smaller at 4 1/8” x 5 3/8”:

To ensure that the die would not move while cutting in the Big Shot, I just used a piece of washi tape across. Once cut, you will have several pieces cut out, which you can save for another card or discard, I put mine in a little bag. Once completed, this is your template:

Using my Stamparatus, I placed the piece of Whisper White cardstock down with one magnet on top, lined up the Blueberry Bushel cardstock, and then secured that piece with one magnet. I then positioned the stamp along the bottom, picked up the stamp with the plate, removed the Blueberry Bushel cardstock, then inked the stamp in Balmy Blue ink, and completed the “hinge-step technique” up the cardstock:

After completing, I lined the Blueberry Bushel cardstock up with the stamped image and then lined up the smaller coordinating stamp, removed the cardstock, inked up the stamp with Crumb Cake ink, and completed the “hinge-step technique” up the cardstock. NOTE: You can start at the top or the bottom when stamping, I just chose to start at the bottom:

When complete, place the Blueberry Bushel die cut cardstock on top, I used the Fine Tip Glue Pen to adhere to the Whisper White cardstock:

On a scrap piece of Whisper White cardstock, I stamp the circle design stamp once in Crumb Cake ink and once in Balmy Blue ink. Since this stamp coordinates with the Layering Circle Framelits, I used the 4thlargest circle to cut out the middle and then the 2ndlargest scalloped circle to cut out the stamped image for layering:

For the front of this card, I used the outside layer in Crumb Cake ink, the inside layer in Balmy Blue ink, enough Classic Weave Ribbon in Crumb Cake to tie around into a bow, and the sentiment from the set is stamped in Blueberry Bushel ink:

The ribbon is tied into a bow around the front, the scalloped circle layer is adhered on top, and the inner circle is adhered with dimensionals to pop it up. This completed piece is then adhered to the card base:

The inside sentiment is stamped on a 4” x 5 ¼” piece of Whisper White cardstock in Blueberry Bushel ink. I stamped the front image stamp along the bottom in Balmy Blue ink to tie into the front of the card design:

Pretty awesome! This was a pretty easy card to make and you can create a card from this set in any color combo! Which is great because I know making masculine cards can be a struggle! You can watch the YouTube video from Stampin’ Up! here.

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’Up! products, hosting a party, joining my team or if you would like a complimentary catalog! 

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!  

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors

Product List