Quick and easy masculine birthday card

Hello and welcome to today’s card, which is a quick and easy masculine themed birthday card featuring the Buffalo Check Background stamp and the Winter Woods stamp set! It’s always hard this time of year to make birthday cards when you are in the midst of your Christmas crafting, so I thought I would take a couple of popular stamp sets from the Holiday Catalog to make this card!

You will start with a card base in Early Espresso cardstock, cut at 4 ¼” x 11”, and scored at 5 ½”:

fullsizeoutput_2f1c

The base layer is Soft Suede cardstock, cut at 4” x 5 ¼”, and is stamped in Early Espresso ink with the Buffalo Check Background stamp:

fullsizeoutput_2f1f

The additional elements for the front of the card is a 6” piece of Copper Trim, the sentiment from Happy Birthday Gorgeous is heat embossed in Copper Emboss Powder on Very Vanilla cardstock and cut out with the smallest oval from the Stitched Shapes Framelits, use the second smallest layering oval from the Layering Ovals Framelits to cut out the Copper Glimmer Paper, cut a piece of Crumb Cake cardstock at 3” x 3 ¾” and use the birch tree trunk stamp from Winter Woods stamp set in Early Espresso ink. I used my Stamparatus and the “hinge-step” technique for this and used my white watercolor pencil to slightly color the trunks so they stood out a little more on the cardstock:

fullsizeoutput_2f22

To assemble the card front, adhere the Crumb Cake cardstock to the Soft Suede base layer, adhere the Copper Trim across the bottom of the Crumb Cake cardstock, use liquid glue to adhere the layering ovals together, and then use a dimensional to adhere. TIP-I used Glue Dots to secure the trim to the front and back of the cardstock.:

fullsizeoutput_2f28fullsizeoutput_2f25

For the inside, the sentiment is from Happy Birthday Gorgeous and is heat embossed in Copper Emboss Powder. The pinecones are from Winter Woods and are stamped in Early Espresso ink:

fullsizeoutput_2f2b

Wasn’t that quick and easy? It’s always fun to combine different stamps to create a great card! Have you been thinking about getting the Buffalo Check or Winter Woods sets? Then you will be happy to know that both of these sets are going to be carried over into the 2019 Occasions Catalog, along with a few other goodies from the 2018 Holiday Catalog! Yay!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

Today’s Colors


Product List

New Years Blog Hop!

fullsizeoutput_2f15

Hello and welcome to the Stamp It Group’s New Year’s Theme Blog Hop! My name is Christina Miller, I’m an independent Stampin’ Up! demonstrator located in Norfolk, Virginia, and you are visiting my blog, Christina’s Creative Corner! Whether this is your first stop on the blog hop or you have hopped on over from another site, thank you for letting me share my creation today! So, let’s get started!

While we send or give out cards for Christmas, what about New Year’s? Whether you are attending a New Year’s get-together, hosting a get-together, or maybe have other needs for a New Year’s card, what better way than to make one with shine and bling?

To start, use Thick Whisper White cardstock for your card base, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_2f00

You will need two pieces of Basic Black cardstock, cut at 4” x 5 ¼”, one for the card front base layer and the other for the inside base layer:

fullsizeoutput_2f03

From the Broadway Bound Specialty Designer Series, you will use this design, cut at 3 ¾” x 5”:

fullsizeoutput_2f06

For the front of the card, you will use the celebrate from the Celebrate You Thinlits to cut out one piece in Gold Glimmer Paper and another piece in Basic Black cardstock (you can use either of the base layers for this). The two balloons are punched out using the Balloon Bouquet Punch (smaller balloon) in Basic Black and Gold Foil Paper. I used the balloon fill-in stamp from Happy Birthday Gorgeous to heat emboss Black Emboss Powder on the gold balloon and Gold Emboss Powder on the black balloon. The gold balloon is tied off with Basic Black Baker’s Twine and the black balloon is tied off with Whisper White Baker’s Twine. I used the pennant from the Playful Pennants Framelits Dies in Basic Black cardstock and used the numbers from the Pick A Pennant stamp set, which are heat embossed in Gold Emboss Powder (I created a template for my Stamparatus to make stamping easier). The tassels from the framelits, which are cut out in Gold Foil Paper:

fullsizeoutput_2f09fullsizeoutput_2efd

To assemble the front of the card, adhere the two base layers to the card base, use your Fine Tip Glue Pen to layer the Basic Black celebrate to the back of the Gold Glimmer celebrate, and then adhere to the DSP.  I used the Fine Tip Glue Pen to adhere the tassels to the pennant, trimming the ends, and then used Mini Dimensionals to adhere to the DSP. The balloons are then adhered with Dimensionals:

fullsizeoutput_2f0c

For the inside sentiment, cut a piece of Whisper White cardstock at 3 ¾” x 5”, the sentiment from the Warm Hearted stamp set is stamped in Memento ink, and the accent stamps from the set are heat embossed in Gold Emboss Powder. This piece is adhered to the other piece of Basic Black cardstock and then adhered to the card base:

fullsizeoutput_2f0f

What do you think?? Isn’t this a pretty easy card to make? Another great use for a New Year’s card, is that if you hand out cards to the service professionals in your life and maybe you aren’t going to see someone until after Christmas, well here you go! This would also come in handy if you need a non-traditional holiday card!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

This month’s Giveaway:

fullsizeoutput_2f16

Winner from last month’s Christmas Theme Blog Hop:

fullsizeoutput_2f17

Don’t forget to scroll down to leave your name and a comment with #stampitcontest and keep on hopping to the next name on the Blog Hop tour:

1. Tami White
2. Julie DeGuia
3. Luly Gonzalez
4. Pam Nichols
5. Tina Wardell
6. Christina Miller
7. Liz Holloway
8. Rachel Nichols
9. Rachael Rife
10. Danette Herera
11. Linda L Cullen
12. Gianna Melone-Sardella

Today’s Colors


Product List

Gallery Grunge meets Butterfly Gala!

Hello and welcome to today’s card, which features the Gallery Grunge stamp set and the new Butterfly Gala Bundle from the 2019 Occasions Catalog! What is in the Butterfly Gala Bundle? A super cute photopolymer stamp set and a coordinating punch! What I love about this set is that there are 4 butterfly designs that you can stamp and are made so that you punch them out perfectly! There are some very sweet sentiments and butterfly backgrounds to fill in the design, or you can color them in with your Stampin’ Blends. Today’s card is a great way to #makeacard and #sendacard to let a special someone know you are thinking of them, so let’s get started!

The card base is Gray Granite cardstock, cut at 4 ½” x 11”, and scored at 5 ½”:

fullsizeoutput_2ede

The base layer is Whisper White cardstock, cut at 4” x 5 ¼”. I used the “plank floor” stamp from Gallery Grunge in Gray Granit ink to create a background:

fullsizeoutput_2ee1

For the front of the card, I stamped this butterfly design on Whisper White cardstock in Memento ink. To get three butterflies, I stamped the whole image first and then inked up just the small butterfly again and stamped that towards the edge of the cardstock. The punch and the stamps have the big butterfly on the bottom and the small butterfly on top. I then colored the butterflies in with Light Petal Pink, Light Flirty Flamingo, and Light Lovely Lipstick Stampin’ Blends and then added a Wink of Stella, then punching out. The sentiment is in Gray Granite ink on Whisper White cardstock and cut out with the second smallest oval die from the Stitched Shapes Framelits. You will also need a 3” piece of Burlap Ribbon and 3 of the 5mm Pearls, which I colored with the Light Lovely Lipstick Stampin’ Blend:

fullsizeoutput_2ee4

To assemble the card front, adhere the base layer to the card base. I first adhered the Burlap Ribbon with glue dots and then adhered the sentiment with dimensionals on top. I next adhered the butterflies with mini dimensionals and then added the colored pearls:

fullsizeoutput_2ee7

The inside is Whisper White cardstock, which I stamped and colored the same butterflies as the front, also with some Wink of Stella. I left this blank so this can be used for any occasion it may be needed for:

fullsizeoutput_2eeb

Do you decorate your envelopes? I sure do and for this envelope the same butterfly design and colors are used, along with Wink of Stella, to tie them all together. I love decorating the envelope, but I do keep it very simple and it will tie into what the card being sent is about:

fullsizeoutput_2eee

Another quick and easy card that is sure to put a smile on your recipient’s face! Remember, it doesn’t have to be a holiday or special occasion to send a card, #makeacard and #sendacard is a sweet way to brighten someone’s day!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors


Product List

Coloring with Stampin’ Blends

Hello and welcome to today’s card, which features the new stamp set Humming Along and the new 6” x 6” Gingham Gala Designer Series Paper from the 2019 Occasions Catalog! Not only is Humming Along a brand new “cling mount” * stamp set, but it also has coordinating dies. This is a beautiful set and a great way to get creative with Stampin’ Blends. If you don’t have any Stampin’ Blends and would like to try them, then this set would be a great way to start. Just simply pick out a few colors that you would use to start with and then slowly add a few more every time you order. I will admit that I was a little hesitant to color with the Stampin’ Blends at first, but there are so many great examples out there and the best way to really become “comfortable” is to stamp and color away! Today I am making a super easy card that you can make in a few minutes, so let’s get started!

The card base is Thick Whisper White cardstock, cut at 4 ¼” x 11”, and scored at 5 ½”:

fullsizeoutput_2ecb

The base layer is Highland Heather cardstock, cut at 4” x 5 ¼” and is embossed with the Subtle Dynamic TIEF:

fullsizeoutput_2ece

For the card front, I stamped the flower in Memento Ink on Whisper White cardstock and colored in with Light Granny Apple Green, Light Highland Heather, Light Daffodil Delight, and Light Calypso Coral Stampin’ Blends. I used a piece of the Highland Heather Gingham Gala DSP, which I trimmed 1 ½” off one end, turned the paper, and cut that in half at 3”. If you cut the 1 ½” piece in half, you will have two pieces measuring ¾” x 6” and two pieces measuring 3” x 4 ½”, which you can make two cards from this piece of DSP. The ¾” x 6” piece will be for the inside of the card. You will also need enough Polka Dot Tulle Ribbon in Whisper White to go around the base layer and tie into a bow:

fullsizeoutput_2ed1

To assemble the card front, adhere the DSP to the base layer at a slight angle, wrap the tulle ribbon around the base layer and tie into a bow, adhere the flower with dimensionals, and then adhere the completed piece to the card base:

fullsizeoutput_2ed4

For the inside of the card, the sentiment from the set is stamped in Highland Heather ink, the leaves are stamped in Old Olive ink, colored in with Lemon Lime Twist Stampin’ Write Marker, added some Wink of Stella, and the ¾” piece of DSP is adhered along the bottom, trimming off the excess. If you notice, the inside piece has a smaller gingham pattern than the front piece, all of the DSP has one side in a big and one side in a small pattern:

fullsizeoutput_2eda

Wasn’t that quick and easy? I chose to use Light Granny Apple Green and Light Calypso Coral Stampin’ Blends because they were the closest to Grapefruit Grove and Lemon Lime Twist, which are two of the colors besides Highland Heather, Daffodil, and Balmy Blue (which Balmy Blue is going to be available in the Occasions Catalog, along with Mossy Meadow) in the Gingham Gala DSP.

*What are Cling Mount Stamps? They are the rubber stamps, but Stampin’ Up! has developed a new film cling to place on top of the stamp. The old image film that are on the older stamps either curled or just didn’t stick very well to the clear blocks and I, like most, just didn’t bother using them. Well, the new ones work very, very well and if there is any TIP I can pass on is that you do need to be careful when peeling the stamp off the case or block, start at the smallest point (if possible), and use the spatula end of the Take Your Pick tool, it’s very useful!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors


Product List

Get more use from the Tags & Tidings Bundle!

Hello and welcome to today’s cards, which features the Tags & Tidings Bundle! Every year I like to make Christmas tags and I also like to send a batch of tags to family, because who wouldn’t like to use a homemade tag on a gift?? My first thought is that this bundle will make it so much easier to make Christmas tags, there’s one stamp and one thinlit die to cut out the 16 images, and then I can use punches, dies, and even retired DSP to create super cute tags! Then I thought, what if I procrastinated, didn’t have time to place my order, was on a tight budget, or even was limiting myself to one Christmas Bundle?  Which would I choose that was versatile and unique? The Tags & Tidings Bundle is a great choice! So today, I am going to show you how I made 6 cards from this bundle.

To start, cut 3 sheets of Shaded Spruce cardstock cut at 5 ½” x 8 ½”, and scored at 4 ¼”, for a total of 6 card bases:

fullsizeoutput_2e95

The base layer is Real Red cardstock, which I used two sheets to cut the 6 pieces at 4” x 5 ¼”. I then stamped this in Memento Ink and I highly suggest using your Stamparatus because this is a Photopolymer stamp and I had to stamp it a couple of times because some of the thicker lines didn’t pick up the ink completely the first time:

fullsizeoutput_2e98

I used a piece of 4” x 5 ½” Whisper White cardstock to stamp the image again in Memento Ink. I then colored in various images using Dark Real Red, Dark Shaded Spruce, Light Pool Party, Dark Pineapple Punch, and Light Soft Suede Stampin’ Blends. The images where then cut out using the Christmas Tags Thinlits Dies:

fullsizeoutput_2e9b

fullsizeoutput_2e9e

I wanted to make half of the cards with Silver and the other half with Gold accents, so I used Gold and Silver Glimmer Paper to layer the tags on:

fullsizeoutput_2ea2

The first set of tags I used the 1 1/8” 1 3/8” Scallop Circle Punches. The second set I used the Classic Label Punch, I just cut a piece of glimmer paper slightly larger than the tag for the other two, and then used the Detailed Trio Punch to round the corners on one. The third set I used the Banner Triple Punch. For the fourth set I used the Tailored Tag Punch, one just layered on the punched glimmer paper, one I used it to cut the corners to match the tag, and then for the other two, I punched out the glimmer paper, adhered the tag, and then just snipped the sides:

fullsizeoutput_2ea6fullsizeoutput_2ea9fullsizeoutput_2eacfullsizeoutput_2eaf

For these two cards, I used the gold layered tags, adhered some Gold Metallic Thread to the back of two, and used some Gold Metallic Pearls. These are adhered to the base layer with dimensionals:
fullsizeoutput_2eb2

These next two cards use the silver layered tags, Silver Metallic thread adhered to the back to two, and use Silver Metallic Pearls:

fullsizeoutput_2eb5

These last two cards only have two tags instead of three, but you will still use the Metallic Thread and Pearls for accents:

fullsizeoutput_2eb8

The inside of all six use stamps from Snowflake Sentiments, stamped in Real Red and Shaded Spruce inks:

fullsizeoutput_2ebb

Once I figured out the best way to layer some of the tags, this was pretty easy to make. It is even possible to make 8 cards from this if you only use silver or gold (not both) to layer the tags or make 16 just using one tag on the card front. Another idea since this is a photopolymer stamp and pliable, is you can use one of the tags to create the background and then create a big tag for the front. A lot of possibilities for this bundle!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors


Product List

Happiest Christmas Wishes

Hello and welcome to today’s card, which is a beautiful Christmas card featuring the Dashing Along Designer Series Paper, In the Woods Thinlits Dies, and Dashing Deer Thinlits Dies! If you haven’t notices, but the Holiday Catalog is a huge hit and the Designer Series Paper is going fast! Luckily, Stampin’ Up! brought back the Dashing Along DSP (this was originally only available in September with a qualifying order), which instead of having the normal 12 sheets with 2 each of 6 double-sided designs, you get 12 sheets with 4 each of 3 double-sided designs! Having 4 sheets of the double-sided design means you can stretch out that paper for card making! For today’s card I am using one sheet of the double-sided design, so let’s get started!

The card base is Cherry Cobbler cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_2e60

The base layer of DSP is cut at 4” x 5 ¼”:

fullsizeoutput_2e63

The next layer of DSP (which is the other side design of the base layer) is but at 3” x 4 ¼”:

fullsizeoutput_2e66

For the front of the card, you will need one each of the smaller deer thinlits from Detailed Deer cut out of Silver Foil Sheet, six each of the outline flower thinlit from Detailed Deer cut out of Silver Glimmer Paper, and one piece of Whisper White cardstock cut at 1 ¼” x 4 ¼” and use the hill thinlit from in the Woods:

fullsizeoutput_2e69

To create the hills, adhere one of the pieces to the DSP and then flip the other over and use dimensionals to adhere over the other layer. The deer on the left is adhered with to the top layer (apply adhesive to the lower half) and then adhere the deer on the right with Mini Dimensionals:

fullsizeoutput_2e6c

The base layer is adhered to the card base and then the scenery is adhered on top of the base layer. The six flowers are actually going to be snowflakes, the three on the scenery are adhered with Glue Dots and the three on the base layer are adhered with Mini Dimensionals:

fullsizeoutput_2e6f

The inside sentiment is from the Dashing Deer stamp set in Garden Green and Cherry Cobbler inks, on a piece of 4” x 5 ¼” Whisper White cardstock. I used my Stamparatus to position the top floral stamp, which I used my Stampin’ Write Markers to color, and then turned the cardstock so the bottom was now the top, colored the stamp again, and then stamped the image. The sentiment is positioned below the floral stamp design:

fullsizeoutput_2e72

This card is really easy to make multiples of when you use your Stamparatus for the inside sentiment, you can use two sheets of the DSP (and still have two more of the design left!), and there are three of the flower thinlits that are used to create snowflakes! With the busy holiday season, having a great card that you can make multiples of in a snap is a time saver!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

Today’s Colors


Product List