Halloween Blog Hop!

fullsizeoutput_288d

Hello and welcome to the Stamp It Group Halloween Theme Blog Hop! For me, Halloween is the “kick-off” for my holiday card making season. Today’s card is a combination of products from the 2018 Holiday Catalog and September’s Paper Pumpkin, Frights & Delights and nothing says Halloween more than creepy, crawly spiders!

To create this card, start with the card base in Night of Navy cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_2856

The base layer is Designer Series Paper from Toil & Trouble, cut at 4” x 5 ¼”:

fullsizeoutput_2853

The next layer is Whisper White cardstock, cut at 3 ¾” x 5”:

fullsizeoutput_282f

To create the scenery on the Whisper White cardstock, use a Sponge Dauber with Pineapple Punch ink to create the moon. I then used my Stamparatus to position the triple tree trunk stamp from the Winter Woods stamp set, stamping in Versamark ink, and using the Hinge Step Technique, which stamps them perfectly across the cardstock. Then the trees are heat embossed in Black Emboss Powder:

fullsizeoutput_2832

I used the side of the Sponge Dauber with Pineapple Punch ink to fill in the tree trunks, to make it look like they are glowing from the moon and used another Sponge Dauber with Night of Navy ink to fill in the rest of the cardstock. TIP-if you use the side with Night of Navy ink it will fill in-between the trees easily:

fullsizeoutput_2835fullsizeoutput_2838

Cut a piece of Basic Black cardstock to 1 ½” x 5” and use the “hill” framelit from the In the Wood Framelits (the cardstock is a little longer than the framelit, so you will have to cut the ends). I then used the two different sized spider stamps from September’s Paper Pumpkin, stamping them in Versamark ink, and heat embossing in Silver Emboss Powder. The hill is then attached with dimensionals:

fullsizeoutput_283bfullsizeoutput_283efullsizeoutput_2841fullsizeoutput_2844

To make the spiders look like they are falling from the trees, I removed the jump ring from two of the Spider Trinkets and then used Silver Metallic Thread to tie a knot to the ring, leaving enough thread that can be adhered to the back of the cardstock. I used a Glue Dot on the back of the spider to adhere it to the front:

fullsizeoutput_2847fullsizeoutput_284afullsizeoutput_284d

To complete the front of the card, adhere the cardstock to the base layer, and then adhere this to the card base:

For the inside sentiment from September’s Paper Pumpkin,  I stamped both spider stamps in Memento ink, starting at the bottom right corner and worked my way around and up to the upper left corner. The sentiments are in Lemon Lime Twist and Night of Navy inks and the pumpkin is in Mango Melody ink, using the Pineapple Punch Stampin’ Write Marker to color in the eyes, nose, and mouth:

fullsizeoutput_285c

So did all those spiders freak you out?? I hope not! Lol Didn’t get this month’s Paper Pumpkin? No worries, you can always stamp the hill with Whisper White Craft Ink to make it look like a “fog is rolling in”! That would be super cute too!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!

This month’s contest:

fullsizeoutput_2891

The winner from the Fall Theme Blog Hop is:

fullsizeoutput_2890

Don’t forget to scroll down to leave your name and a comment with #stampitcontest and keep on hopping to the next name on the Blog Hop tour:

1. Tami White
2. Julie DeGuia
3. Pam Nichols
4. Lori Mueller
5. Christina Miller
6. Rachael Rife
7. Luly Gonzalez
8. Rachel Nichols
9. Kathi Desmarais
10. Linda Cullen
11. Tina Wardell
12. Oksana Semenska
13. Teresa Howe
14. Kim McPeek
15. Dawn Seelhoff
16. Gianna Melone-Sardella

 

Today’s Colors:


Product List

Little Twinkle Fun Fold Card

Hello and welcome to today’s card, which is an easy fun fold card featuring the Twinkle Twinkle Suite! What I love about this suite is that the stamp set is versatile (not just for making a baby card), the colors of the DSP are soft, and the adhesive backed sequins and coordinating punch add just the right amount of accents! The template for this card is very easy and can be used for any of your card making creations!

First, start with Gray Granite cardstock, cut at 4 ¼” x 11”, and scored at 2 ¾” and at 5 ½”:

fullsizeoutput_285f

The inside card base is Soft Sea Foam cardstock, cut at 3 ¾” x 7 ½”, and scored at 3 ¾”:

fullsizeoutput_2862

For the outside card base, I used the star design from the Twinkle Twinkle DSP, one piece cut at 4” x 5 ¼” and two pieces cut at 4” x 2 ½”:

fullsizeoutput_2865

For the inside card base, I cut one piece of Whisper White cardstock and one piece of the Twinkle Twinkle DSP at 3 ½” x 3 ½” each:

fullsizeoutput_2868

I stamped the outside sentiment on a piece of Whisper White cardstock, heat embossed with Silver Emboss Powder, and fussy cut out. The moon and stars are punched out of Silver Foil Paper with the Twinkle Builder Punch and the adhesive backed stars are from the Twinkle Adhesive Backed Sequins:

fullsizeoutput_286b

To put the card together, adhere the DSP to the outer card base and the DSP and cardstock to the inner card base:

fullsizeoutput_286efullsizeoutput_2871fullsizeoutput_2874

Before you adhere the inner card base, position it where you want it to go, overlapping the front panel of the outer card base about half way. I used liquid glue on the back of the inner card base since this does not set right away and I can move the inner piece if needed:

fullsizeoutput_2877fullsizeoutput_287a

I tied a piece of Night of Navy Medium Baker’s Twine in a bow around the front panel, adhered the embossed star and the three smaller stars with snail, the bigger star with a Mini Dimensional, and then positioned the moon so the tip is overlapping the inner card base a little and adhered with Mini Dimensionals. This will help keep the card closed:

fullsizeoutput_287dfullsizeoutput_2880

The inside sentiment from Little Twinkle stamp set is stamped in Night of Navy ink and I used some of the adhesive backed stars for embellishment:

fullsizeoutput_2883

Isn’t this a fun and cute card?? You can easily change the DSP used if you need a more boy or girl themed card. This can also be changed into a child’s birthday card by using the “Love you more than all the stars” for the inside sentiment!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Witch hat is witch??

Hello and welcome to today’s card, which is a fun and easy way to be creative by using two different designs from the Toil & Trouble Designer Series Paper! One sheet of the Toil & Trouble DSP is of witch’s hats, which are pretty easy to fussy cut out, and the other sheet is of broomsticks, so I combined the two for this super cute card.

The card base is Early Espresso cardstock, cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_27fb

The base layer is Pumpkin Pie cardstock, cut at 4” x 5 ¼”:

fullsizeoutput_27fe

The next layer is the broomstick design from the Toil & Trouble DSP, cut at 3 ¾” x 5”:

fullsizeoutput_2801

I fussy cut four of the witch’s hats from the DSP and cut enough of the Braided Linen Trim to tie in a bow around the front of the card:

fullsizeoutput_2804

Adhere the DSP to the base layer cardstock, choose three of the hats to adhere with dimensionals, and tie the Braided Linen Trim in a bow towards the bottom:

Adhere this to the Early Espresso base layer:

fullsizeoutput_280d

The inside sentiment is on Whisper White cardstock, cut at 4” x 5 ¼”, the sentiment is made using the Labeler Alphabet stamp set in Pumpkin Pie ink, and the fourth hat is adhered to the bottom left-hand corner:

fullsizeoutput_2810

Wasn’t that easy?? This is another great way to make your Designer Series Paper work for you! No matter if you are limited with your craft supply, you can easily substitute the Braided Linen Trim and the sentiment for what you have.

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Bubble, Bubble, Toil & Trouble!

Hello and welcome to today’s card, which is created using two of the designs from the Toil & Trouble Designer Series Paper! While I may have decided not to get the Cauldron Bubble stamp set or the coordinating framelits for my Halloween cards this year, I could not not get the Toil & Trouble DSP! So, I decided that I would cut out some of the images from the DSP to create a card with! Make the DSP work for you, right??

To create this card, first start with Lemon Lime Twist cardstock, cut at 4 ¼” x 11”, and scored at 5 ½” for the card base:

fullsizeoutput_27cb

The base layer is Basic Black cardstock cut at 4” x 5 ¼”:

fullsizeoutput_27ce

The second layer is Whisper White cardstock cut at 3 ¾” x 5” and I created the background using this design from the Gallery Grunge stamp set in Mango Melody, Lemon Lime Twist, and Gorgeous Grape inks:

fullsizeoutput_27d1

From the Toil & Trouble DSP, I cut the witches out from that sheet and then for the cauldron sheet, I cut the spiders and stripes into a strip and the dots into a strip, then cut out the cauldrons individually. The spider strip is cut at 3 ¾” and I added some Wink of Stella to the bubbles and fire on the cauldron:

fullsizeoutput_27d6

I adhered the striped DSP across the stamped cardstock, adhered the witches around the cauldron, and then adhered the cauldron with dimensionals in the middle of the witches:

fullsizeoutput_27dbfullsizeoutput_27e1

This is then adhered to the Basic Black base layer and then adhered to the card base:

For the inside sentiment, I used a piece of 4” x 5 ¼” Whisper White cardstock, stamped the sentiment from Spooky Sweets stamp set in Gorgeous Grape ink, adhered another cauldron cut out in the corner, and then stamped the image stamp from Warm Hearted in Lemon Lime Twist ink to make it look like it was rising out of the cauldron:

fullsizeoutput_27f7

Fussy cutting is not quick and easy, however, being able to create with what you have cut out is! I almost did not get this DSP, however, I decided that I would try and be creative with some of the sheets that I was not to enthused about. We’ve all been there, right??

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

A Warm Hearted Boo!

Hello and welcome to today’s card, which is a fun and easy Halloween card featuring the Warm Hearted Hostess Set and Toil and Trouble Designer Series Paper! Did you notice that one of those cute little Spider Trinkets is “hanging” around?? Lol In case you missed them, there are two hostess stamp sets from the 2018 Holiday Catalog, Warm Hearted and Hung with Care, which you can earn for FREE if you have a qualifying product purchase or host a workshop totaling $150 or more! I chose the Warm Hearted stamp set because it has sentiments for all the upcoming holiday occasions! I just absolutely love the “Boo” sentiment, which is a two-step stamp!

To create this card, first start with a Lemon Lime Twist card base cut at 4 ¼” x 11”, and scored at 5 ½”:

fullsizeoutput_279e

The Toil and Trouble DSP design that I used is the same sheet, front and back, the base layer is cut at 4” x 5 ¼”, and the second layer is cut at 3 ¾” x 5”:

For the front of the card, you will need to use the 2 ¼” Circle Punch to cut out a piece from the Black Foil Sheet and then emboss using the Corrugated Dynamic Textured Impressions Embossing Folder. The sentiment is stamped in Lemon Lime Twist and Gorgeous Grape inks, on a piece of Whisper White cardstock, punched out using the Tailored Tag Punch, and I used a Sponge Dauber with black ink to sponge around the edges. I cut a piece of Black Satin Ribbon long enough to go across the card front, cutting the ends. The Spider Trinket has a piece of Silver Metallic Thread tied in a knot through the jump ring and cut long enough to wrap around the punched circle piece from the spool:

fullsizeoutput_27a7

To put the front of the card together, adhere the two layers of DSP together and then adhere to the card base:

I adhered the ribbon across the middle of the card and then to make the spider dangle, I used two glue dots on the back, placed the thread on the glue dots and then placed two more glue dots on top of those to secure the thread:

fullsizeoutput_27b0fullsizeoutput_27b3fullsizeoutput_27b6

I placed the thread in one of the grooves of the embossed foil sheet and then adhered the sentiment on top, this will keep the spider in place. This piece is then adhered to the card base with dimensionals:

fullsizeoutput_27b9fullsizeoutput_27bc

For the inside of the card, start with a piece of Whisper White cardstock cut at 4” x 5 ¼”, the skull is stamped in Lemon Lime Twist and Gorgeous Grape inks, the sentiment from Spooky Sweets is stamped in Lemon Lime Twist ink, and I adhered the scrap piece of DSP along the bottom:

fullsizeoutput_27bf

Isn’t that quick and easy?? I just love how the Spider Trinkets add the little extra touch to the card! This is great if you are making Halloween Cards because you can use any of the Toil and Trouble DSP and create multiple cards!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Create a birthday card using Buffalo Check background stamp!

Hello and welcome to today’s card, which is a more “masculine” themed birthday card using the new Buffalo Check background stamp! What I love about this stamp is how versatile it really is, you can use whatever color scheme and use for whatever occasion! This stamp really wasn’t on my radar from the 2018 Holiday Catalog, but after seeing examples for Halloween, Christmas, and even Baby cards, I decided this stamp is a must! The color scheme for today’s card was really just me seeing what stamping in Night of Navy ink on Call Me Clover cardstock would look like, so I just ran with it and created this birthday card!

To start, you will need Night of Navy cardstock cut at 5 ½” x 8 ½”, and scored at 4 ¼”:

fullsizeoutput_2768

The base layer is Call Me Clover cardstock, cut at 4” x 5 ¼”, and stamped in Night of Navy ink with the Buffalo Check background stamp:

fullsizeoutput_276b

For the front of the card elements, I used the sentiment from Picture Perfect Birthday stamp set on Whisper White cardstock, heat embossed with Silver Emboss Powder, and punched out with the Tailored Tag Punch. Use the Everyday Label Punch on Night of Navy cardstock and then trim the rounded edge on the sides off, this creates a different look. I used one of each size of the True Gentleman Buttons, using Silver Metallic Thread thru the button holes, and you will use additional thread for the card front:

fullsizeoutput_2765fullsizeoutput_276e

I wrapped the Silver Metallic Thread around the base layer 3 times, using some snail on the back to adhere the ends, and layered and adhered the 2 punched images together, using dimensionals to adhere to the card base:

fullsizeoutput_2771

Adhere the base layer to the card base and the buttons are adhered to the bottom corner with glue dots, use about 2-3 on each to help adhere them to the cardstock:

fullsizeoutput_2774

The inside sentiment is on a piece of 4” x 5 ¼” Whisper White cardstock, the sentiment is heat embossed in Silver Emboss Powder and the rest of the images are stamped in Night of Navy, Call Me Clover, and Pineapple Punch inks:

fullsizeoutput_2777

Wasn’t that a quick and easy card?? I can’t wait to continue to create with this new Buffalo Check background stamp! Whether it’s tone on tone or mixing ink and cardstock colors, so many possibilities!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!

I hope today’s project inspires you to get creative! Please contact me if you have any questions about the products used on this or any other project. I hope you enjoyed today’s blog and thanks for stopping by!


Product List

Lilypad Lake Z Fold Pop-Up Card

Hello and welcome to today’s card, which is a super fun and easy Z Fold Pop-Up Card! I made this a birthday card for dearest sister-friend, who loves Lilypad Lake stamp set! I’ve posted on Facebook a couple of other cards that I made, so I figured why not show you how easy it is to make, which you can do out of ONE piece of cardstock!

The card base is Balmy Blue cardstock, cut at 4 ¼” x 11”, and scored at 2 ¾” and at 5 ½”:

fullsizeoutput_26cb

The front fold is Balmy Blue cardstock, cut at 2 1/8” x 11”, and scored at 2 ¾” and at 5 ½”:

fullsizeoutput_26ce

The inner strip to create the “pop-up” part is Balmy Blue cardstock, cut at 2 1/8” x 11” and scored at 7/8”, 3 5/8”, 4 1/8”, 6 7/8”, 7 3/8”. You will then fold into a “Z” and use strong adhesive on the “mountain” of the folds (I used Tear & Tape):

The panels for the card base are Whisper White cardstock, cut at 4” x 5 ¼” and 2 pieces cut at 2 ½” x 4”:

fullsizeoutput_26da

For all the card base panels I wanted to make them look like the sky, so for the two smaller panels, I placed them next to each other and created a mask for clouds using the cloud dies from the Up & Away Thinlit Dies and sponged Balmy Blue ink onto the cardstock:

fullsizeoutput_26ddfullsizeoutput_26e0

For the bigger panel, I first used a sponge dauber with Pineapple Punch ink in the upper left corner and then used the sun stamp from Lilypad Lake in Crushed Curry, stamping several times for the effect. I then used the same cloud masks with a Stampin’ Sponge and Balmy Blue ink for the rest of the sky:

Since I knew I was making the bird from Lilypad Lake stamp set into a Heron, I wanted to make it look like he was “walking on a dock” for the front fold piece, so I used a piece of Wood Textures 6” x 6” DSP cut at 2” x 5 ¼”, embossed it with the Pinewood Planks Dynamic TIEF, and then sponged Early Espresso ink to give the embossing a darker definition:

fullsizeoutput_26ef

For the smaller two front fold panels, I cut two pieces of Whisper White cardstock at 2” x 2 ½”, sponged Balmy Blue ink, and then used the wave stamp in Balmy Blue and Blueberry Bushel inks. I also stamped the wave stamp in Blueberry Bushel ink on the front panel of the inner strip:

fullsizeoutput_26f5fullsizeoutput_26f8

I stamped the Heron in Memento Ink and then colored with Light and Dark Smoky Slate Stampin’ Blends. I stamped the sailboats 5 times in Memento Ink and then colored them in with Light and Dark Pineapple Punch, Light and Dark Call Me Clover, Light and Dark Poppy Parade, Light and Dark Highland Heather, Light and Dark Lovely Lipstick, Ivory, Bronze, Light Granny Apple Green, Light Bermuda Bay, Light Night of Navy, Dark Pool Party, Dark Petal Pink, Dark Flirty Flamingo, and Dark Mango Melody Stampin’ Blends Markers:

fullsizeoutput_26fb

Attach the panels to the card base and to the front fold base:

fullsizeoutput_26fefullsizeoutput_2701

I used Tear & Tape on the ends of the front fold and then attached to the card base:

fullsizeoutput_2704fullsizeoutput_2707

Next place the inner strip in the “box”. The easiest way I have found to make sure this piece is correct and the card folds over, is to adhere the end pieces first, and then fold the card closed and the two inner pieces will adhere correctly:

fullsizeoutput_270a

The final step is to adhere the Heron and all the sailboats! For the inner strip, I used glue dots at the bottom of the boat and then for the front fold panels I popped the smaller ones and the Heron up with Mini Dimensionals. I also used Wink of Stella on all 3 of the front fold panels:

fullsizeoutput_270dfullsizeoutput_2710fullsizeoutput_2713

After I put this all together, I felt like it needed a little bit more. So, I used the birds from the High Tide stamp set and heat embossed the sentiment from the Rooted in Nature stamp set in Copper Embossing Powder on Whisper White cardstock. This was then cut out with the smallest circle from the Stitched Labels Framelits and I also used the heart framelit from this set to cut out from Copper Foil Sheets:

fullsizeoutput_2716fullsizeoutput_2719

I just love how this turned out! Now I will admit these are not my instructions, I got them from Splitcoast Stampers! Having great instructions make it so easy to make and share creative ideas!!

Wondering what specials are going on?? Current specials are listed to the right!!

Live in the USA? I would love to be your demonstrator! Contact me today to learn more about purchasing Stampin’ Up! products, hosting a party, joining my team or if you would like a complimentary catalog!

You can head over to my online store by clicking the Shop Now! button at the very top to see all available products and don’t forget to print out your shopping list on the righthand side, under Follow Me!


Product List